Search results

Page title matches

• Short block
  '''Short block''' is an [[automotive]] term describing an [[engine]] sub-assembly consisti ...pecification, and the crankshaft saddle alignment is within specification. Block cracks and holes can be repaired by pinning, the bore can be honed to the n
  2 KB (278 words) - 22:48, 11 June 2009
• Long block
  '''Long block''' is an [[automotive]] term describing an [[engine]] sub-assembly consisti ...rt block]]. The long block is always a superset of the corresponding short block.
  876 bytes (131 words) - 08:51, 8 October 2009
• Cam in block
  ...layouts are ones in which the [[camshaft]] is placed within the [[cylinder block]], usually beside and slightly above the [[crankshaft]] in a [[straight eng ...Oldsmobile V8 engine|Rocket V8]]. It was the first high-compression cam-in-block design, and is the [[archetype]] for most modern pushrod engines.
  11 KB (1,698 words) - 08:59, 8 October 2009
• Cam-in-block
  ...on engine]]s is one where the [[camshaft]] is placed within the [[cylinder block]], usually beside and slightly above the [[crankshaft]] in a [[straight eng ...tly only General Motors, Ford, DaimlerChrysler, and Cummins produce cam-in-block or pushrod engines in any large numbers, although GM in particular has seve
  11 KB (1,817 words) - 11:16, 30 January 2011

Page text matches

• Short block
  '''Short block''' is an [[automotive]] term describing an [[engine]] sub-assembly consisti ...pecification, and the crankshaft saddle alignment is within specification. Block cracks and holes can be repaired by pinning, the bore can be honed to the n
  2 KB (278 words) - 22:48, 11 June 2009
• Long block
  '''Long block''' is an [[automotive]] term describing an [[engine]] sub-assembly consisti ...rt block]]. The long block is always a superset of the corresponding short block.
  876 bytes (131 words) - 08:51, 8 October 2009
• Cylinder bank
  ...ined. Engines often have more than one row of pistons, each with their own block, and these are referred to as '''cylinder banks'''.
  548 bytes (87 words) - 17:20, 17 December 2007
• Cylinder (engine)
  ...perature distribution, but the block is somewhat less rigid. The cylinder block sits between the engine [[crankcase]] and the cylinder head, translating th ...|water-cooled]] engine will have a single row of cylinders in the [[engine block]]. [[V_engine]]s use a [[cylinder bank]] at each leg of the V (a [[V6]] usi
  3 KB (492 words) - 00:06, 8 August 2009
• Cylinder
  ...[[iron]]), which are pressed into each of the cylinder spaces. A cylinder block sits between the engine [[crankcase]] and the cylinder head, translating th ...|water-cooled]] engine will have a single row of cylinders in the [[engine block]]. [[V_engine]]s use a [[cylinder bank]] at each leg of the V (a [[V6]] usi
  3 KB (441 words) - 19:45, 31 March 2009
• Engine configuration
  ...This is because the most common forms are all based on a combined [[engine block]] and [[crank case]] that are [[milled]] from a single piece of [[casting|c ** [[Flat engine]], essentially a V-block with the cylinder banks at 180 degrees from each other, as opposed to 60 or
  3 KB (419 words) - 10:14, 14 June 2009
• Flathead engine
  ...bustion engine]] that has the [[poppet valve|valves]] placed in the engine block beside the [[piston]], instead of in the [[cylinder head]], as in an overhe ...e of intakes along the side of the engine leads to the alternate name '''L-block''' (or L-head), due to the cylinders having the shape of an upside-down L.
  3 KB (479 words) - 22:45, 8 September 2009
• Babbitt metal
  ...tripped, and the white metal trimmed back to the top surface of the pillow block. Hardened white metal is soft enough to be cut with a knife or sharp chisel ...fill the cap of the pillow block through the hole in the top of the pillow block cap that will eventually be a lubrication hole.
  4 KB (740 words) - 23:31, 3 July 2009
• Ohc
  ...HC also inherently allows for greater engine speeds over comparable cam-in-block designs. ...shrods to transfer the movement of the lobes on the camshaft in the engine block to the valves in the [[cylinder head]].
  4 KB (549 words) - 18:19, 17 July 2009
• Ohv
  ...se today. This contrasts with previous designs, which made use of [[Cam-in-block#L-head|side valves]] and [[sleeve valve]]s. * [[Cam-in-block]]
  1 KB (146 words) - 09:59, 27 September 2009
• Leone motorcycle
  ...e with mopeds. In 1952 ''Leone'' developed a small 75 cc motorcycle from a block.
  1 KB (156 words) - 20:43, 22 November 2010
• Valvetrain
  ; [[Cam-in-block]] : The camshaft is located within the engine block, and operates directly on the valves, or indirectly via pushrods and rocker
  3 KB (501 words) - 00:38, 3 December 2009
• Dwell cam
  ...while it is being moved forwards/backwards. A separate adjustable sliding block or link is used to control the amount of forwards/backards movement of the
  795 bytes (119 words) - 21:47, 16 July 2008
• Pushrod engine
  ...layouts are ones in which the [[camshaft]] is placed within the [[cylinder block]], usually beside and slightly above the [[crankshaft]] in a [[straight eng ...Oldsmobile V8 engine|Rocket V8]]. It was the first high-compression cam-in-block design, and is the [[archetype]] for most modern pushrod engines.
  10 KB (1,635 words) - 08:54, 4 August 2009
• MDS
  ...d crankcase were cast in one block, while three-speed gearbox is in a semi block. The frame was open, the average diameter wheels fitted with 2.75-16 tires,
  1 KB (210 words) - 00:42, 18 December 2016
• Casoli
  ...ttilio Casoli]] produced a 125 2 stroke, with two-speed gear change in the block. WIth five years of victorious races, the bikes capability had been fully r
  834 bytes (115 words) - 10:00, 16 June 2009
• Iso Rivolta
  ...ars of Iso ([[1971]] [[Ford]] 351 Cleveland engines replaced the GM small block). The most well-known [[Gran Turismo]] of Iso Rivolta berlinetta-bodied Iso
  3 KB (378 words) - 11:31, 14 June 2009
• Imperia motorcycle
  ...was quite high. A four speed ''Burman'' gear box was built right into the block. ...iven by beveled [[gears]] and sapling. In 1954 came the last change to the block. The sump was changed with generous cooling fins, and completely redesigned
  2 KB (272 words) - 10:06, 28 November 2010
• Magliano
  ...by two inclined camshafts in the head. The three speeds changed is in the block which in turn controlled the gears. The tubed frame had a telescopic front
  1 KB (158 words) - 19:44, 15 June 2009
• Biblocco
  ...with one or two a heads that were each to complete each stroke in the sub-block. Many car makers in the early twentieth century had used this method. These
  613 bytes (109 words) - 11:04, 28 January 2012
• Ercoli-Cavallone
  ...that the rear [[cylinder]] it had a better cooling. The change is sliding block with [[gears]], the [[transmission]] is made up of a primary and secondary
  1 KB (179 words) - 16:46, 30 March 2009
• Lamborghini V10
  There is also speculation that the engine block of the V10 is closely based on the 4.2 liter V8 Audi produces for their lux ...: Bore × stroke 82.5 mm x 92.8 mm (0.89 ratio), 496 cc/cylinder, aluminium block with integrated liners with eutectic alloy
  2 KB (284 words) - 11:38, 8 October 2009
• Taura
  ...[moped]] with a 175 cc [[JAP]] engine mounted with the transmission in the block. In 1929, they created a motorcycle with a 500 cc single [[cylinder]] JAP e
  1 KB (161 words) - 13:21, 26 June 2009
• Accumolli
  ...Turin]] and in 1950 presented a unique prototype, powered by a [[Piaggio]] block. The [[aluminum]] body was struck by hand with shrouded 3.00 x 12 wheels.
  749 bytes (99 words) - 10:03, 13 December 2010
• Carda
  ...built auxiliary engines in 1950 in [[Bologna]]. It was a small two-stroke block on a platform that sat above the rear wheel of a bike that could connect th
  678 bytes (98 words) - 09:41, 15 April 2010
• Overhead camshaft
  ...HC also inherently allows for greater engine speeds over comparable cam-in-block designs. ...shrods to transfer the movement of the lobes on the camshaft in the engine block to the valves in the [[cylinder head]].
  5 KB (694 words) - 08:50, 8 October 2009
• San Giorgio
  ...ier'', models with a large 5.6 liter and 8 liter with a three-[[cylinder]] block, which came in various versions (30/40hp, 40/50hp, 50/60hp). The 1906 found
  768 bytes (105 words) - 09:57, 12 December 2009
• Pushrod
  [[Image:pushrod engine.jpg|thumb|Picture of a [[V8]] [[engine block]] (with [[intake manifold]] removed), showing the camshaft, pushrods, and r ...e [[poppet valve|valves]]. Lifters or ''[[tappet]]s'' reside in the engine block between the camshaft and pushrods. The later [[overhead cam|overhead cam (O
  8 KB (1,302 words) - 08:11, 14 June 2009
• DC Scoiattolo
  ...camshafts and valves soaking in an oil bath. The gearbox was built in the block in bulk and shifted at speed with a foot lever. Top speed was 60km/h and co
  797 bytes (118 words) - 01:48, 5 August 2011
• Ultra
  ...ead in auctions and rockers. The engine has the three-speed [[gearbox]] in block, weighed 13 kg and could reache a maximum speed of 57 km/h.
  773 bytes (108 words) - 23:18, 19 April 2010
• Cagiva K
  This bike mount the engine block of the [[Cagiva Mito|myth]], without any change in fact, undergoing the sam
  2 KB (279 words) - 23:01, 28 January 2009
• Overhead cam
  ...HC also inherently allows for greater engine speeds over comparable cam-in-block designs. ...r arms to transfer the movement of the lobes on the camshaft in the engine block to the valves in the [[cylinder head]].
  6 KB (952 words) - 17:33, 7 August 2009
• Cagiva Super City
  This bike mount the engine block of the [[Cagiva Mito|myth]], without any change in fact, undergoing the sam This bike because of its connection with the myth, with its block [[engine]] has changed names over the years, following the different exchan
  4 KB (667 words) - 23:29, 28 January 2009
• H engine
  An '''H engine''' (or H-block) is an [[engine configuration]] in which the [[cylinder (engine)|cylinder]]
  2 KB (279 words) - 07:43, 15 July 2009
• Salve
  ...pump and an automatic sump motor cross section, three-speed gearbox in the block, double cradle frame and expansion brakes on both wheels. They were develop
  977 bytes (137 words) - 15:55, 19 April 2010
• Connecting rod
  ...are usually embossed with the corresponding position number in the engine block. ...nder block where the [[cylinder head]] fastens; thus, for a given cylinder block longer stroke, giving greater [[engine displacement]] and power, requires a
  7 KB (1,108 words) - 06:53, 18 April 2009
• Borghi
  ...ucati]] [[Mosquito]] blocks ([[Ducati]] [[Cucciolo]] was the famous stroke block), marketed under the brand name [[Olympia]].
  957 bytes (133 words) - 15:58, 14 April 2010
• Cam in block
  ...layouts are ones in which the [[camshaft]] is placed within the [[cylinder block]], usually beside and slightly above the [[crankshaft]] in a [[straight eng ...Oldsmobile V8 engine|Rocket V8]]. It was the first high-compression cam-in-block design, and is the [[archetype]] for most modern pushrod engines.
  11 KB (1,698 words) - 08:59, 8 October 2009
• Variable displacement
  ...Motors (''Displacement on Demand'' in the GM LS engine generation IV small-block) and Honda (''Variable Cylinder Management'' on the Honda J engine). Honda
  2 KB (233 words) - 22:23, 23 September 2009
• BRM
  ...i]] motorcycle manufacturer company based in [[Modena]], had developed the block for the 49 cc two-stroke auxiliary motor. There they designed auxiliary eng
  1 KB (139 words) - 13:49, 14 April 2010
• V8
  ...1977]] or so they were gone. In [[truck]]s and other larger vehicles, big-block V8s in their historic form lasted until the early [[1990s]]. ...eveland]]''. As can be seen, there is overlap between big-block and small-block ranges, and an engine between 6.0 L and 6.6 L could belong to eit
  17 KB (2,591 words) - 00:05, 8 August 2009
• Gallina
  ...sis developed by [[Sandro Todeschini]] and a heavily modified Suzuki GSX-R block. Hayashi, the Japanese funding partner for the project, however, ended up n
  996 bytes (143 words) - 10:16, 16 April 2010
• Fiat 30-45 HP
  It was equipped with a 6-cylinder engine tri-block 7408 cm3 developing 50 hp.
  2 KB (201 words) - 07:22, 6 July 2009
• Cam-in-block
  ...on engine]]s is one where the [[camshaft]] is placed within the [[cylinder block]], usually beside and slightly above the [[crankshaft]] in a [[straight eng ...tly only General Motors, Ford, DaimlerChrysler, and Cummins produce cam-in-block or pushrod engines in any large numbers, although GM in particular has seve
  11 KB (1,817 words) - 11:16, 30 January 2011
• Desmodromic valve
  ...e teeth would mesh with timing pulleys, also external to the main [[engine block]], and transmit the timing information to the valves.
  3 KB (485 words) - 23:55, 15 November 2009
• Figini & Lazzati
  ...y appeared in 1899 an improved version of the "Bicicletto", by which the [[block]] is sat higher back in the [[pedals]] turned the [[frame]]. In 1906 only a
  1 KB (189 words) - 14:14, 15 April 2010
• Conti
  ...rsion), Gurtner carburetor, front fork spring type shocks by [[Druid]], in block chain driven three-speed transmission, brake expansion on both wheels, with
  2 KB (291 words) - 08:30, 20 August 2009
• Alfa Romeo Twin Cam engine
  ...also feature twin camshafts, and are based on a [[Fiat]] designed [[engine block]], please refer to the [[Alfa Romeo Twin Spark engine]] page. * [[Aluminium]] [[alloy]] engine block with [[cast-iron]] cylinder liners
  5 KB (646 words) - 14:34, 15 June 2009
• Cagiva W
  This bike mount the engine block of the [[Cagiva Mito|myth]], without any change in fact, undergoing the sam
  3 KB (415 words) - 23:05, 28 January 2009
• Gulf of Lyon
  ...ligocene]]-[[Miocene]] anti-clockwise rotation of the [[Corsican-Sardinian Block]] against the European [[Craton]]. This extension rejuvenated a very comple
  2 KB (307 words) - 23:15, 23 September 2009
• IMV
  ...m]]. The supporting cast [[aluminum]] body The four-speed [[gearbox]] in [[block]] and the final shaft drive. The telescopic front fork while the rear was f
  1 KB (199 words) - 15:09, 16 April 2010
• Poppet valve
  ...ver Exhaust', '''IOE''' or '''F-head''', where the intake valve was in the block and the exhaust valve was in the head; later both valves moved to the head.
  5 KB (840 words) - 08:50, 8 October 2009
• Lamborghini LM004
  | 7.0 litre [[V12]] 60 degree light alloy block front mounted, four wheel drive
  3 KB (308 words) - 00:04, 25 February 2009
• Dardo
  ...s, Normale and Sport with 132 cc to 124 cc. The [[gearbox]] was a two-tier block, while the friction cone is housed in the rear hub.
  1 KB (223 words) - 19:56, 22 November 2010
• Ferrari 159
  ...ransmissions and retained the [[Fiat]] tradition of mounting the engine in-block with the gearbox.
  2 KB (328 words) - 22:33, 10 March 2009
• Cylinder head
  ...ne]], the mechanical parts of the valve train are all contained within the block, and the head is essentially a flat plate of metal bolted to the top of the
  3 KB (415 words) - 23:56, 20 September 2009
• Lancia V6 engine
  |Block || light alloy
  3 KB (341 words) - 19:15, 2 March 2009
• Hemi engine
  ...the side oiler engine block modified slightly to deal with the missing in-block cam among other [[OHC]] issues. Because of its power levels it was banned f ...signs with hemispherical chambers included the Calliope, which used two in-block cams, arranged one over the other, to drive 3 valves per hemispherical cham
  10 KB (1,448 words) - 21:41, 16 July 2008
• Flat-H
  An '''H engine''' (or H-block) is an [[engine configuration]] in which the [[cylinder (engine)|cylinder]]
  3 KB (449 words) - 12:23, 15 July 2008
• Tarbo
  ...Tarbo-moped was therefore a Mustang headlight and fork and a Jawa-CZ 50 cc block. Tarbo also built 125 cc and 350 cc motorcycles Jawa-blocks. The cooperatio
  2 KB (227 words) - 11:01, 11 October 2011
• Bugatti Type 49
  The Type 40A shared its block with the [[#Type 49|Type 49]] and displaced 1.6 L (1627 cc/99&nbs
  4 KB (534 words) - 21:27, 31 July 2009
• Bugatti Type 30
  The Type 40A shared its block with the [[#Type 49|Type 49]] and displaced 1.6 L (1627 cc/99&nbs
  4 KB (552 words) - 11:10, 14 June 2009
• Crankshaft
  ...urnals riding on replaceable [[plain bearing|bearings]] held in the engine block, the [[main bearing]]s. As the crankshaft undergoes a great deal of sideway ...], [[V engine|V]] or [[flat engine|flat]] engines. The same basic [[engine block]] can be used with different crankshafts, however, to alter the [[firing or
  7 KB (1,012 words) - 23:56, 20 September 2009
• Ferrari 159 S
  ...ransmissions and retained the [[Fiat]] tradition of mounting the engine in-block with the gearbox.
  3 KB (375 words) - 22:35, 10 March 2009
• Galbusera
  ...cylinder (V8). In essence, this last engine built from two coupled four [[block]]s. This had a [[compressor]].
  2 KB (261 words) - 11:32, 11 February 2014
• Parmigiano Reggiano
  ...no.jpg|thumb|300px|Parmigiano Reggiano festival in [[Modena]]; each wheel (block of cheese) costs 490 [[euro]].]]
  3 KB (435 words) - 12:35, 17 August 2008
• Parmigiano-Reggiano
  ...no.jpg|thumb|300px|Parmigiano Reggiano festival in [[Modena]]; each wheel (block of cheese) costs 490 [[euro]].]]
  3 KB (436 words) - 12:37, 17 August 2008
• Berneg
  ...were made of cast iron, as the only thing not lightend. The gear change in block was done with a four-speed foot pedal and the transmission and primary chai
  2 KB (274 words) - 21:41, 26 June 2018
• DOHC
  ...g rods to transfer the movement of the lobes on the camshaft in the engine block to the valves in the [[cylinder head]].
  3 KB (410 words) - 14:33, 24 September 2009
• Brixia-Zust
  ...ith a fixed head and side valves operated by two camshafts in the cylinder block. It was produced until 1911.
  2 KB (281 words) - 10:32, 21 November 2011
• Comet
  ...n by two camshafts in the head. The four speed [[transmission]] was in the block and the bike develop a power of 10 hp at 6000 rpm.
  2 KB (269 words) - 22:38, 6 February 2011
• Nazzaro
  ...ructed by the young company in 1922 was the Tipo 2, with a 4 cylinder mono-block with a 4398 cm³, 20/30 HP engine and a maximum speed of 100 km/h. With thi
  2 KB (274 words) - 16:41, 31 March 2010
• Bizzarrini A3C/GT 5300 Strada
  The Strada was powered by a [[Chevrolet Small-Block engine]] displacing 5358 cc and producing 365 hp (272 kW).
  2 KB (279 words) - 15:31, 11 November 2009
• Flat-4
  ...ooled applications fins are often seen machined into the external cylinder block walls.
  3 KB (535 words) - 00:27, 8 August 2009
• Fiat Dino
  *2.0 DOHC V6 65° (aluminium block), 1987 cc, 160 PS @7200 rpm, 163 Nm @6000 rpm *2.4 DOHC V6, (cast iron block), 2418 cc, 180PS @6600 rpm, 216 Nm @4600 rpm (1969)
  5 KB (629 words) - 11:08, 25 March 2010
• Nassetti
  ...of the finest products.A characteristic motor in its own frame. The motor-block " iL Pellegrino " was developed from e.g. the A.R model. Trough the Nassett ...or block did not change, in view of the multitude models which has a Dilly-block we can say that the Dilly is the "work-horse"of the Nassetti.
  7 KB (1,072 words) - 22:34, 18 April 2010
• X engine
  An '''X engine''' is a [[piston engine]] comprising twinned [[v_engine|V-block engines]] horizontally-opposed to each other. Thus, the cylinders are arran
  2 KB (305 words) - 10:26, 8 October 2009
• Alfa Romeo GTV6
  ...od received a bulge to clear the top of the intake plenum on the larger V6 block and became the most pronounced feature of this exciting sport coupé. Since
  3 KB (499 words) - 23:48, 7 August 2009
• Ladetto
  ...a 175 cc two-stroke bicycle motor with distribution valves in the head and block [[Atre]] [[transmission]], a 132 cc two-stroke Atre [[transmission]], a 175
  2 KB (360 words) - 09:17, 1 November 2010
• GM High Feature engine
  ...illac CTS]]. [[Holden]] sells the HFV6 under the name, '''Alloytec'''. The block was designed to be expandable from 2.8 L to 4.0 L. It is a 60° 24-valve design with aluminum block and heads and [[Fuel injection|Sequential Electronic Fuel Injection]]. Most
  8 KB (1,122 words) - 14:35, 15 June 2009
• IMN
  ...rocker arms, power of 11 bhp at 6000 rpm, four-speed gearbox with a pedal block and final [[drive shaft]] with bevel helical teeth. The frame was tubular t
  2 KB (319 words) - 11:14, 18 December 2016
• TAU
  ...he built the Tau TVR engine with six-speed intended for road racers. Cross block machine were not suitable, so Triveldi developed a new engine. The Tau (Tau
  2 KB (338 words) - 22:31, 24 June 2010
• Alfa Romeo Giulietta
  ...a Romeo Twin Cam engine|engine]] of 1290 cc, with light [[alloy]] cylinder block and twin overhead [[camshaft|camshafts]]. The original Giulietta engine pro ...Cam engine]] of 1290 cc [[straight-4]], with light [[alloy]] cylinder block and alloy [[cylinder head]] with twin overhead [[camshaft]]s. The original
  6 KB (814 words) - 09:23, 12 June 2018
• ISO
  .... Starting in 1968 the Grifo could also be had with Chevrolet's 427 ci big-block V-8; this version was known as the ''Grifo 7 litri'' and was easily recogni
  7 KB (1,007 words) - 10:08, 3 May 2010
• Maserati 8CM
  |Construction ||cast-iron block and head
  2 KB (271 words) - 19:10, 19 October 2009
• Miller Balsamo
  ...our-valve kopklepmotoren by ''Python'' and from [[1934]] a 98 cc [[Sachs]]-block, and an addition of an own 246 cc kopklepper engine.
  2 KB (324 words) - 11:21, 30 January 2011
• Bizzarrini Ghepardo GTS 4.0V
  The Ghepardo's engine, a 4.1 litre block derived from the Renault designed engine used in the [[GP2]] single-seater
  4 KB (584 words) - 21:05, 27 April 2009
• V6
  ...h an aluminum block but was replaced in [[1969]] by a 2.4 L cast-iron block version (the Dino car was renamed the 246GT). ...the [[Alpine (car)|Alpine]]-Renault A440. The CH1 was a 90° [[cast iron]] block V6, similar to the mass produced PRV engine in those two respects but other
  8 KB (1,194 words) - 11:40, 8 October 2009
• Rotary engine
  ...frame, and the [[propeller]] simply bolted onto the front of the cylinder block.
  12 KB (2,030 words) - 18:09, 14 September 2009
• Bandini GT
  ...emispherical chambers of the outbreak, cylinders dismantled in ironcasted block.
  3 KB (468 words) - 11:08, 15 June 2009
• Hermes
  ...ion with 40 hp at 1,300 r / min was built. It was provided with a cylinder block in a double aluminum and magneto ignition from Bosch. The hood, styled like
  2 KB (366 words) - 21:59, 12 December 2016
• Borgo
  ...verhead valve race engine with four valves per cylinder. In 1925 an engine block published a version was the last engine Moto Borgo made in the series. In 1
  3 KB (397 words) - 06:09, 3 October 2016
• Alfa Romeo Giulietta Sprint
  ...n [[Alfa Romeo Twin Cam engine]] of 1290 cc, with light [[alloy]] cylinder block and alloy [[cylinder head]] with twin overhead [[camshaft|camshafts]]. The
  4 KB (554 words) - 15:52, 23 April 2009
• Hydroplane racing
  While still a limited class, the ULs run big block Chevy motors and travel at speeds between 130 and 160 mph. The boats are fr
  4 KB (566 words) - 00:30, 23 June 2009
• Dagrada
  ...reathing cross flow head. Hanging a [[Weber]] 38 DCO from each side of the block, he then tuned the exhausts for maximum effect, capable of eardrum-busting
  5 KB (827 words) - 23:32, 17 December 2016
• Ollearo
  |Engine || 500 cc, Valves tilted in head, rocker enclosed in block |Transmission || four gears, and reverse acting with the engine block
  6 KB (881 words) - 19:11, 25 June 2018
• Alfa Romeo 75
  ...gment [[driveshaft]] which ran the length of the underside from the engine block to the [[gearbox]], and rotated at the speed of the engine. The shaft segme
  4 KB (548 words) - 10:55, 13 March 2009
• Ceccato
  ...o horizontal cylinders side by side, with a four speed transmission in the block. The range was completed by a [[moped]] with the power transfer roller on t
  3 KB (456 words) - 16:53, 30 November 2010
• Turbo-Hydramatic
  ...and to some full-sized [[Chevrolet]]s (usually coupled to the Mark IV big-block V8). It can be identified by an oil pan in the shape of what some would cal ...tation wagon, [[Cadillac]] Brougham) coupled to either a [[Chevrolet Small-Block engine#305|Chevrolet 305]] or an [[Oldsmobile V8 engine#307|Oldsmobile 307]
  14 KB (2,205 words) - 17:10, 11 May 2009
• Iso Grifo
  ...ctacular Corvette L71 (a Tri-Power version of the famous Corvette 427) Big Block. This (Seven liter) power plant required many changes to the car to fit and ...e 7 Litri, but when it comes to rarity, the Series II 5-speeds and the Big Block Targas are the thing to look for. In any case, connoisseurs from all over t
  10 KB (1,689 words) - 11:41, 22 March 2009
• Hot rod
  ...Flathead engine|flathead Ford]] V8, and the small block [[Chevrolet Small-Block engine|Chevrolet V8]] were particularly popular as replacements because of ...model T or A replica), with a Jaguar (or [[Volvo 240]]) rear axel, a small block V8 and fiberglass tub, but some have been built using for instance a [[Volv
  9 KB (1,411 words) - 11:52, 8 October 2009
• Fiat 1
  The four cylinders were in a single block for the first time, taking cue from the [[Italian]] car manufacturer [[Aqui
  3 KB (387 words) - 22:51, 28 August 2010
• Lancia Dialfa-18HP
  ...]]'':'' 'Type 53'''; engine front, longitudinal, a 6-cylinder in-line, tri-block (3 blocks cast iron cylinder 2 each), [[bore]] 90mm, [[race (mechanical)|ra
  4 KB (489 words) - 20:23, 24 February 2009
• Fial
  ...known as''6/8 HP'', with a [[twin-cylinder gasoline engine]] an [[iron]] [[block]] with 1135 [[cubic centimeter|cc]] with [[bore]] and [[stroke]] in 85x100
  3 KB (471 words) - 10:05, 18 November 2011
• Aprilia RS125
  ...d by a single cylinder [[2-stroke]], [[Nikasil]] coated aluminium cylinder block, liquid cooled 124.8cc [[Rotax]] engine.
  4 KB (486 words) - 08:02, 19 April 2009
• CMN
  ...era]]. The first model was the 10/12 HP fitted with a 4 cylinder motor bi-block, that it was produced until 1908, years in which Italy was in bad financial
  4 KB (700 words) - 10:21, 10 April 2009
• Bandini 750 sport internazionale
  ...uble overhead camshaft, 8 inclined valves, cylinders detachable ironcasted block. ...n and gears [[tested (mechanical) | head]] Alloy chamber burst hemisphere, block and [[base]] five [[media bench]] unique fusion of alloy, sump in reeds of
  9 KB (1,217 words) - 22:27, 23 September 2009
• Romeo Autotutto
  ...overhead, chain-driven camshafts and two valves per. cylinder. The engine block and cylinder head of aluminum. Bore 74 mm. Stroke 75 mm. Capacity 1290 cm3.
  5 KB (715 words) - 10:10, 3 June 2009
• Engine displacement
  ...], [[Ford 335 engine#302 Cleveland|302 Cleveland]], [[Chevrolet Small-Block engine#302|Chevrolet 302]])||4.95 L||5.0 L |GM (Chevrolet; Buick)||307 CID||[[Chevrolet Small-Block engine#307|307 CID]]||5.03 L||NA (not marketed in SI)
  17 KB (2,600 words) - 08:52, 8 October 2009
• Lancia Eta-30/50HP
  ...[[engine]] front, longitudinal, 4-cylinder [[engine inline|inline]], mono-block ( cast iron), bore 100 mm, stroke 130 mm, total displacement [[cubic centim
  4 KB (553 words) - 21:23, 27 April 2009
• Fuel pump
  ...by a lobe on the engine's [[camshaft]] and therefore bolted to the engine block. It created negative pressure to "suck" the [[gasoline]] through the lines.
  4 KB (634 words) - 09:01, 8 October 2009
• Compression ratio
  ...ket]]s are leaking, [[piston]] rings are worn or that the [[cylinder block|block]] is cracked. ...nd the title page) can be modified. In practice, the SVC adjusts the upper block through a small range of motion, using a [[hydraulic]] actuator.
  16 KB (2,479 words) - 14:53, 25 September 2009
• Bandini 1000
  ...hanical) | head]] alloy [[aluminium]], 8 valves, chamber burst hemisphere, block and [[base]] to five [[media bench]] unique fusion of aluminium, sump in [[
  4 KB (615 words) - 22:30, 23 September 2009
• Bartali
  ...le, with a 125 cc two stroke engines with a four speed transmission in the block, capable of reaching 100 km/h. In 1958, it still listed all of these models
  3 KB (527 words) - 11:33, 11 November 2010
• Alfa Romeo 2000
  ...double overhead camshaft solid lifter four-cylinder engine with cast iron block and light alloy heads
  3 KB (414 words) - 22:37, 2 July 2012
• Combustion chamber
  ...ed so that the moving [[piston]]s are flush with the top of the [[cylinder block]] at [[top dead centre]]. The combustion chamber is recessed in the [[cyli
  4 KB (570 words) - 14:59, 25 September 2009
• VR6 engine
  In 1997, VW removed a cylinder from the VR6, creating the VR5, the first block to use an uneven number of cylinders in a V design (other than the Honda V3 ...p;mm between cylinders. They are staggered along the length of the engine block to allow the engine to be shorter and more compact than conventional V6 eng
  13 KB (2,025 words) - 21:40, 16 July 2008
• San Cristoforo
  ...y of "Kite", fixedly secured to the tubular frame was replaced with a body block completely removable to facilitate maintenance.
  4 KB (586 words) - 23:48, 30 July 2010
• Formula Ford
  ...on blocks with little special preparation. In 1994, Ford replaced its Kent block engine with the more modern and more powerful 1800 cc 16-valve [[Ford ...ecame a legend - known as "Patch" after the number of times its [[cylinder block]] had been repaired, the same unit won several Formula Ford festivals in di
  11 KB (1,809 words) - 22:52, 27 April 2009
• CanAm
  ...was followed in 1968 by the M8A, a new design based around the Chevy "big block" engine as a stressed member of the chassis. The M8B, M8C, M8D and M20C wer ...ow in a racing car. It was a twin-engined car, with the by-then usual big-block Chevrolet engine providing the driving force, and a tiny snowmobile engine
  8 KB (1,221 words) - 18:08, 25 September 2009
• Roller bearing
  ...ction. As each log comes out the back, it is moved to the front where the block then rolls on to it. You can imitate such a bearing by placing several pen
  13 KB (2,121 words) - 07:16, 6 July 2009
• Dirt track racing
  ...otors exceed 400 cubic inches but the 380 [[Engine_block#Small-block|small block]] is a common open motor. These motors utilize aluminum blocks and heads an #All Steel Motor - steel [[cylinder block|block]] and [[cylinder head|heads]], a maximum of 362 cubic inches, and weigh in
  19 KB (3,038 words) - 10:55, 14 December 2008
• Autograss
  ...pent on the engines for these cars, including Cosworth turbo motors, large block American V8s, and V6s of different types, all highly tuned. The sound of th
  6 KB (1,009 words) - 21:57, 31 May 2008
• Alfa Romeo Twin Spark engine
  ...oy wet-liner engine, chain driven) and later with 16 valves (a modern iron block engine with alloy head, belt driven). All cars featuring the Twin Spark eng
  6 KB (883 words) - 22:36, 14 June 2009
• Radial engine
  In addition the radial is far more resistant to damage; if the block cracks on an inline that entire [[cylinder bank]] will lose power, but the
  7 KB (1,042 words) - 00:15, 8 August 2009
• Bandini 1000 P
  ...[[tested (mechanical) | head]] alloy, 8 valves, chamber burst hemisphere, block to five [[media bench]] unique fusion of aluminium, sump in [[aluminium]],
  5 KB (755 words) - 22:29, 23 September 2009
• Engine knocking
  ...of a small [[Piezoelectricity|piezoelectric]] [[microphone]] on the engine block, connected to the engine's [[electronic control unit]]. Spectral analysis
  4 KB (649 words) - 08:51, 8 October 2009
• Aprilia RS50
  ...lia]]. It is powered by a single cylinder [[2-stroke]] aluminium cylinder block, liquid cooled 50cc AM6 engine. The bike is popular in countries that have
  3 KB (440 words) - 17:26, 13 October 2009
• Della Ferrera
  ...linder slightly inclined forward, with the distribution overhead valve and block three-speed gearbox, was launched.
  5 KB (707 words) - 10:53, 18 December 2016
• Dirt speedway racing
  ...asic 358 cubic inch (5.9 L) small block up to the 430 cubic inch (7 L) Big Block Chevy.
  13 KB (2,197 words) - 09:41, 8 October 2009
• Bandini 1000 Turbo
  * Materials and particularity: block to 5 [[media bench]] and alloy sump, alloy [[head]][[DOHC]], distribution c
  6 KB (820 words) - 22:29, 23 September 2009
• Maserati A6
  ...the '''A6 GCS''' two-seater racing car, «G» denoting ''Ghisa'', cast iron block, and «CS» denoting ''Corsa & Sports''. It first raced at [[Modena]] 1947
  4 KB (607 words) - 19:36, 15 April 2014
• Bandini 750 sport siluro
  ...al) | head]] to two valves per [[Rod (mechanical) | cylinder]] in a single block and [[Distribution (mechanical) | distribution]] [[SOHC]] gear; constituted ...anged also the position of spinterogeno, which was placed on the head. The block cast iron pipes contained the cylinder dismantled. They were also studied n
  15 KB (2,094 words) - 15:39, 3 June 2010
• Bandini formula 3
  ...ialbero] ] Gear with 8 valves inclined, cylinders dismantled in ironcasted block.
  6 KB (916 words) - 11:24, 13 February 2009
• Marco Simoncelli
  ...ith one lap to go, he leaned to the left on the long straight, possibly to block off [[Hector Barbera]]. Barbera then crashed into him and Simoncelli won th
  8 KB (1,046 words) - 13:31, 19 April 2009
• Straight-5
  ...ylinder (engine)|cylinders]] aligned in one row, sharing a single [[engine block]] and [[crankcase]]. This configuration is a compromise between the smaller
  5 KB (764 words) - 21:52, 27 September 2009
• History of the Alfa Race Engine
  ...|'''Satta's classic four cylinder [[Giulietta]] 1300cc engine of 1954. The block and general engine configuration used through 1996''']]
  5 KB (728 words) - 13:34, 5 July 2010
• A1 Grand Prix cars
  *[[Cylinder block]]: Die cast aluminium alloy *[[Cylinder block]]: Sand cast aluminium alloy
  9 KB (1,364 words) - 13:53, 29 March 2010
• FIA Formula Two Championship
  The engine is a new turbocharged unit based on the Audi 1.8 litre 20 valve block and head, as used in Formula Palmer Audi. Whereas the engine in the FPA car
  8 KB (1,164 words) - 22:00, 17 August 2009
• AAC 815
  ...ation system. A four-speed manual transmission was integral to the engine block. Four Weber 30DR2 [[carburettor]]s were specified for a total output of 72
  5 KB (662 words) - 10:20, 25 September 2012
• Formula Three
  ...aturally-aspirated engines. Engines must be built from a production model block, and often must be sealed by race or series organizers, so that no private
  7 KB (1,038 words) - 10:10, 14 June 2009
• Palladian architecture
  ...f palladian revival houses with [[Holkham Hall]] in [[Norfolk]]. The main block of this house followed Palladio's dictates quite closely, but Palladio's lo ...ers themselves, competing for attention with, or complementing the central block. This was all very far removed from the designs of Palladio two hundred yea
  23 KB (3,546 words) - 22:35, 14 June 2009
• Cizeta
  ...er engine made up of two coupled [[V8]]s sharing a single [[Cylinder block|block]] and styling by [[Marcello Gandini]] that was strikingly similar to the la The unique cylinder block was made on special Swiss tooling, and is a single aluminum alloy casting w
  15 KB (2,612 words) - 17:13, 19 February 2015
• Roadway noise
  ...res''' is an important input, since the presence of buildings or walls can block sound under certain circumstances, but reflective properties can augment so
  7 KB (1,112 words) - 22:47, 11 June 2009
• Espresso
  ...dle) holds the filter-basket and is locked under the grouphead's diffusion block. When the brew process is begins, pressurized water at 90±5°C (200±9°F)
  8 KB (1,254 words) - 18:18, 11 June 2009
• Fiat 24-32 HP
  ...l steel chassis rather than wood that dominated at the time, a twin-engine block 7238 cc developing 40 hp. Weighing in at just 450kg, it exceeded the speed
  5 KB (727 words) - 06:53, 1 May 2012
• Ferrari Dino
  ...tor was a 65 degree, dual overhead camshaft, 9.0:1 compression ratio, iron block with alloy heads. The European motor produced 195 bhp (at 7,600 rpm), ...haft, 2927 cc motor with 4 Weber carburetors which produced 250hp. The V-8 block and heads were made of an aluminum alloy. The compression ratio was 8.8:1.
  12 KB (1,778 words) - 07:21, 29 April 2016
• Caffè
  ...richness of the final beverage, but special care is needed in order not to block the water from crossing it, in case of an excess of grounds. Some hints pre
  6 KB (1,097 words) - 11:04, 8 October 2009
• Engine
  ...pstan]], [[windlass]] or [[treadmill]], and with ropes, [[pulley]]s, and [[block and tackle]] arrangements, this power was transmitted and multiplied. Thes
  9 KB (1,353 words) - 00:51, 9 August 2009
• Aeronautica Militare
  ...interceptors, the AMI has leased 30 [[F-16A]] Block 15 ADF and four F-16B Block 10 Fighting Falcons, with an option to some more. The coming years also wil ![[General Dynamics]] [[F-16 Fighting Falcon|F-16AM Block 15]]
  28 KB (3,890 words) - 11:59, 8 October 2009
• Marine engine
  ...pstan]], [[windlass]] or [[treadmill]], and with ropes, [[pulley]]s, and [[block and tackle]] arrangements, this power was transmitted and multiplied. Thes
  9 KB (1,383 words) - 00:47, 4 March 2009
• Ferrari 250 LM
  ...nd 412 P had the same 4-liter block which is different from the P4-4 liter block and all had P3 not P4 chassis. All the P3 chassis were made in 1966 at the
  14 KB (2,214 words) - 11:55, 14 April 2021
• Lamborghini Reventón
  ...|instruments]] are housed in a structure milled from a solid [[aluminium]] block, protected by a [[carbon fiber]] casing. The [[g-force|G-Force-Meter]] is c
  6 KB (950 words) - 19:39, 21 October 2009
• Itom
  ...fuel tank is painted in monochromatic apple green with logo ITOM in white block letters. (Alas, no more the beautiful globe and laurel garland logo.)
  6 KB (961 words) - 20:32, 22 November 2010
• Alfa Romeo 147
  ...e red/black contrast. In the interior we can also find the aluminium pedal-block, the gear knob with aluminium styling, the kick-panel and red speed-dial em
  7 KB (1,016 words) - 18:22, 27 October 2009
• Formula One engines
  ...[[Bore (engines)|bore]] is the diameter of the cylinder hole in the engine block for the piston and the [[Stroke (engines)|stroke]] is the distance the pist The crankcase and cylinder block must be made of cast or wrought [[aluminium]] alloys. The crankshaft and ca
  22 KB (3,308 words) - 13:51, 19 March 2009
• Lancia Astura
  ...2 the maximum |potenza]] of [[horse vapore|HP]] to 4000 turns. To part the block cylinders in [[cast iron]], the triple chain of distribution and the filter ...ction bearing in the big end of connecting rod; pistons in aluminum alloy; block cylinders in cast iron.
  40 KB (5,790 words) - 00:34, 12 December 2011
• Ducati Apollo
  *Front tire: Ribbed 5.00 X 16 inch Rear tire: Block tread 5.00 x 16 inch
  6 KB (964 words) - 09:00, 7 October 2009
• Hand brake
  ...in combination with a [[bumper jack]] at the rear of the vehicle if wheel block wedges are not used; jacking one rear wheel up will allow the differential
  8 KB (1,350 words) - 00:20, 22 February 2011
• Ferrari Dino engine
  ...419 cc. This increased power to 195 hp (145 kW), but the engine block was now made of cast iron rather than aluminium.
  14 KB (2,144 words) - 23:23, 21 September 2008
• Maserati A6GCM
  G : Ghisa, the engine block was in cast iron
  7 KB (1,025 words) - 19:27, 19 October 2009
• Ferrari P
  ...and 412P had the same 4 liter block which is different from the P4 4 liter block and all had P3 not P4 chassis. P 3/4 0846 is unique having, after modificat
  17 KB (2,599 words) - 09:20, 14 April 2021
• Ferrari 166
  ...i had diverted their attention at exploring the full potential of the long block [[Lampredi]] design V12. In those early 1950s the interest in two litre rac
  8 KB (1,150 words) - 23:08, 26 June 2010
• Aurea
  ...n a 4 speed gearbox with a central mounted gear change gate and a reverse "block - out" button located in centre of gear knob.
  9 KB (1,325 words) - 19:55, 15 July 2010
• Lamborghini Aventador
  | class="lightbg" id="car_specsright" | aluminum alloy block and head
  9 KB (1,326 words) - 18:17, 12 November 2012
• Officine Meccaniche
  ...5. Late in 1924 came a twin-[[carburetor]] version, which required a new [[block]] casting since the [[manifold]] was internal. Two centre mains were utiliz
  8 KB (1,279 words) - 12:01, 19 September 2017
• Oran Park Raceway
  | [[Nissan 300ZX]]-[[Chevrolet Small-Block engine#350|Chevrolet]]
  9 KB (1,081 words) - 11:25, 8 April 2012
• Lancia Artena
  |[[Change (mechanical) |Cambio]] || cambio in block with the motor, to 4 relationships + retromarcia (III and always IV in take |[[Change (mechanical) |Cambio]] ||cambio in block with the motor, to 4 relationships + retromarcia (III and always IV in take
  37 KB (5,283 words) - 01:57, 12 December 2011
• Ferrari F10
  ...e the system on the MP4-25, the F10 uses a pad on the drivers left hand to block the airflow.
  11 KB (1,563 words) - 19:21, 28 April 2012
• Ceirano GB & C
  ...r was so pleased to have them by Agnelli and associates note in the entire block Ceirano small company, including employees, for the sum of 30,000 lire. The
  11 KB (1,713 words) - 23:23, 27 July 2010
• Alfa Romeo 2600
  ...ead camshafts replaced the earlier four-cylinder engine with its cast-iron block which dated back to the 1900 range of 1950. Two carburettors were fitted t
  11 KB (1,609 words) - 13:05, 14 January 2012
• De Tomaso
  ...American [[Ford Motor Company|Ford]] engines; powered by a 4.7-litre iron-block [[V8]] engine and with [[steel]] and [[aluminium]] coupé bodywork from [[G
  11 KB (1,722 words) - 00:27, 17 August 2010
• Indy Racing League
  ...replaced by a 3.5L format for 2000, at which time the requirement for the block to be production-based was dropped. This formula was used through 2003. In ...I5R engine is a normally aspirated, fuel-injected, aluminum alloy cylinder block V-8 with a displacement of 3.0 liters (183.1 in³). The valve train is
  22 KB (3,319 words) - 08:28, 8 October 2009
• Alfa Romeo Brera
  ...nd, whilst the front-brake calipers (on the 4-cylinder models) are in mono-block aluminium. All these design changes have reduced the total weight of the ve
  10 KB (1,550 words) - 08:47, 14 October 2009
• Fiat 500
  ...thus producing an impressive 21 [[horsepower|bhp]] from the same original block.
  11 KB (1,713 words) - 17:00, 22 January 2014
• Alfa Romeo 1900
  ...compact than the prewar designed 6C 2500, the 1900 was powered by an iron block and aluminum head four-cylinder
  11 KB (1,578 words) - 10:50, 4 October 2012
• Steering
  *[http://www.the-wheel-clamp.co.uk How to block your wheel]
  12 KB (1,845 words) - 10:47, 8 October 2009
• Cagliari
  ...of the Roman domination is the '''[[Roman Amphitheatre]]''', carved into a block of rock (the typical lime-stone on which Cagliari is built). The Amphitheat
  15 KB (2,244 words) - 13:05, 14 April 2009
• Ferrari F50
  Block: Nodular cast iron <br>
  9 KB (1,292 words) - 00:20, 14 October 2009
• Diesel engine
  ...mperature. Engine block heaters (electric resistive heaters in the engine block) plugged into the utility grid are often used when an engine is shut down f
  33 KB (5,114 words) - 23:11, 23 September 2009
• Castagna
  ...ess was moved to via Montevideo, number 19. The premises occupy the entire block and cover an area of 32,000m2, of which 20,000 are under cover and there ar
  11 KB (1,750 words) - 10:44, 18 December 2009
• Grand-Am
  The Daytona Prototypes are purpose- built chassis powered by stock-block production engines from [[Lexus]], [[Pontiac]], [[Porsche]], [[BMW]], [[Inf
  16 KB (1,912 words) - 12:15, 8 October 2009
• Alfa Romeo TZ
  ...in the GTA, contributed to the speed of the TZ; the standard Giulia alloy block with wet steel liners was installed at an angle under the hood of the TZ to
  12 KB (1,789 words) - 07:00, 16 April 2011
• Air brake (rail)
  ...nds of cars are not required as the loose hoses are sucked onto a mounting block.
  20 KB (3,254 words) - 23:06, 5 July 2009
• Air brake (road vehicle)
  ...hen the service line pressure drops, it causes the valve in the trailer to block the air supply from the reservoir while releasing the pressure in the brake
  26 KB (4,530 words) - 21:58, 17 August 2009
• 2006 Monaco Grand Prix
  ...nies any of the allegations that he "''parked''" his Ferrari on purpose to block Fernando Alonso from taking pole position off him. The Grand Prix was also
  24 KB (3,450 words) - 22:56, 27 February 2009
• ATS
  ...mid-mounted 2.5-liter V8 engine designed by [[Chiti]], with a light-alloy block and cylinder heads, a single overhead camshaft per cylinder bank, as well a | class="lightbg" id="car_specsright" | light alloy block and head
  26 KB (4,048 words) - 22:39, 14 March 2014
• Fiat 131
  ...he engines used in the outgoing 124 range, with a [[cast iron]] [[cylinder block]] and [[aluminium alloy]] [[cylinder head]], either pushrod with chain driv
  13 KB (1,741 words) - 22:15, 27 October 2009
• Architecture
  ...nce portions of a building. Landscaping may be used to create privacy and block direct views from or to a site and enhance buildings with colorful plants a
  15 KB (2,153 words) - 08:12, 8 October 2009
• Ermini
  ...Ermini introduced a new engine. Still a dohc 1100 it now had an aluminium block and five [[main-bearing]] [[crankshaft]]. Around 20 engines were built and
  12 KB (1,899 words) - 11:25, 10 March 2014
• Rimini
  ...dicated to [[Anthony of Padua|Saint Anthony of Padua]] and the Clock Tower block were built, giving the square its present shape and size.
  16 KB (2,404 words) - 22:06, 11 August 2009
• Autosud
  The new formula would be based on a stock block and head configuration with proprietary 1100 cc engines. There was no doubt
  13 KB (2,286 words) - 01:04, 30 September 2010
• Alfa Romeo 155
  ...2.0&nbsp;L engine. This anomaly came about because the 1.8&nbsp;L engine block, with its narrower bore, allowed Alfa to use a longer stroke on the racing
  13 KB (1,933 words) - 09:06, 22 October 2009
• Spada
  You should know here that the engine is a tweaked Corvetta C6's aluminium block V8, and cylinder head comes with an eight-quart dry-sump lubrication system
  13 KB (2,106 words) - 07:07, 22 December 2009
• Maserati 250F
  ...splacement of 2493cc. The pistons and liners were inserted into a aluminum block and crankcase. The 12 valve head had two overhead camshafts, two magnetos,
  14 KB (2,071 words) - 19:52, 19 October 2009
• Spark plug
  A light brownish discoloration of the tip of the block indicates proper operation; other conditions may indicate malfunction. For
  23 KB (3,923 words) - 22:48, 11 June 2009
• Moto Guzzi
  In 1979 a small block version of the air-cooled V-twin designed by engineer '''Lino Tonti''' was ...ed at 60 bhp and 65 bhp respectively. The production of the 4-valve "small block" engines ended in the later 1980s.
  53 KB (7,792 words) - 12:53, 9 December 2009
• Alfa Romeo 6C
  The 2,309cc engine in the 6C 2300 featured a one-piece crankcase/cylinder block and aluminum alloy cylinder head. Camshaft drive was by a combination of ro
  16 KB (2,255 words) - 22:13, 2 July 2012
• Ilario Bandini
  ...remained of the original Crosley engine was the aluminium [[Cylinder block|block]].
  29 KB (4,362 words) - 11:46, 25 May 2010
• Ship
  ...ntal axis. used where mechanical advantage greater than that obtainable by block and tackle was needed.
  19 KB (3,038 words) - 23:49, 7 August 2009
• Mazda Raceway Laguna Seca
  | {{flagiconUSA}} [[Chad Block]] / {{flagiconUSA}} [[Steve Knight]] / {{flagiconGER}} [[Claudia Hürtgen]]
  22 KB (2,926 words) - 14:28, 17 July 2009
• Le Mans 24 Hours
  ...first try with Lotus. The Indianapolis powerplant, a 4.2&nbsp;L aluminum block Fairlane engine with a Colotti gearbox, was installed in the new GT-40s. ...The Mk IIs were powered by a 7.0&nbsp;L engine based on a [[Ford Galaxie]] block. As there was no gearbox alvailable on the market able to sustain the power
  73 KB (12,410 words) - 14:12, 4 August 2009
• Formula 2
  ...]] FVA, the sixteen-valve head on a four cylinder [[Ford Cortina|Cortina]] block that was effectively the "proof of concept" for the legendary DFV. The 1967
  18 KB (2,587 words) - 16:05, 20 November 2009
• Lancia Augusta
  |[[Change (mechanical) |Cambio]] ||cambio in block with the motor, to 4 relationships + retromarcia; III and IV in taken direc |[[Change (mechanical) |Cambio]] ||cambio in block with the motor, to 4 relationships + retromarcia; III and IV in taken direc
  33 KB (4,913 words) - 11:15, 12 September 2010
• Rapid
  The only type offered in the catalog is a four-cylinder block, just 1590 cc, with three forward gears and reverse, and since 1916 also av
  17 KB (2,711 words) - 23:21, 13 November 2011
• Stanguellini
  ...out. After several tests the engine threw a rod which damaged the head and block; the tests were over.
  18 KB (2,812 words) - 08:17, 18 February 2014
• Cagiva Mito
  ...ems of the forks at a distance of over one another and to lose the housing block of ignition, Furthermore, the SP kit for the forks is updated (''800078890'
  28 KB (4,585 words) - 16:35, 13 June 2009
• Europe
  ...Wall]], the wider [[Iron Curtain]], and the [[Soviet Union]] the [[Eastern Block]] disintegrated. ...d 1.1 billion years ago, Baltica and Arctica (as part of the [[Laurentia]] block) became joined to [[Rodinia]], later resplitting around 550 million years a
  53 KB (7,197 words) - 17:33, 7 August 2009
• Lamborghini Sesto Elemento
  | class="lightbg" id="car_specsright" | aluminum block and head
  20 KB (2,951 words) - 18:16, 12 November 2012
• Lancia Beta
  ...engines as used in the Beta. In addition the mounting points on the engine block were different to allow for the transverse installation as opposed to the l
  19 KB (2,841 words) - 01:39, 12 December 2011
• Pagani Huayra
  ...mode is activated. The aluminum center console is machined from one solid block of aluminum and features a clarinet style array of mechanical switches cont
  17 KB (2,787 words) - 18:29, 10 March 2011
• Bizzarrini
  ...of the Grifo were powered by a massive [[Chevrolet Corvette]] 350bhp "big block" engine. These 90 handbuilt units are distinguishable by the ugly raised "p
  18 KB (2,821 words) - 00:48, 3 July 2012
• Junior
  ...ly 1899 a company by the name of "Italian Car Factory Torino, which bought block after fifteen days, for thirty thousand lire, plant, equipment, patents and
  19 KB (3,076 words) - 00:25, 27 January 2012
• Formula One regulations
  ...phite-reinforced plastic|carbon]] [[composite material]]s for the cylinder block, [[cylinder head]] and [[piston]]s is not allowed.
  21 KB (3,484 words) - 20:54, 10 March 2010
• Isetta
  ...ke so many other Hot Wheels cars been built in reality. Powered by a [[big block]] [[Chevrolet 502]] engine with [[supercharger]].
  19 KB (2,987 words) - 12:03, 30 April 2010
• Alfa Romeo 164
  The block of the Twin Spark was the illustrious 2.0 L that had been a part of Alfa's
  21 KB (3,053 words) - 10:55, 22 October 2009
• Le Mans 24 hours races
  ...s first try with Lotus. The Indianapolis powerplant, a 4.2&nbsp;L aluminum block Fairlane engine with a Colotti gearbox, was installed in the new [[Ford GT4 ...The Mk IIs were powered by a 7.0&nbsp;L engine based on a [[Ford Galaxie]] block. As there was no gearbox available on the market which was able to sustain
  71 KB (11,867 words) - 09:53, 7 October 2009
• Venice
  ...o rise above 110 [[centimetre]]s, the pontoons will be filled with air and block the incoming water from the Adriatic sea. This challenging engineering work
  26 KB (3,794 words) - 10:48, 19 June 2009
• Fuel injection
  ...l Motors]]' [[Rochester, New York|Rochester]] division, for its [[GM Small-Block engine#283|283 V8 engine]]. This system directed the inducted engine air ac
  35 KB (5,222 words) - 08:19, 11 June 2009
• Carburetor
  ...ly a critical adjustment (the rule of thumb for the common Chevrolet small block V8 used to be that the float bowl fuel level and the distributor points gap
  27 KB (4,310 words) - 17:26, 17 May 2011
• Alfa Romeo P3
  ...iod, weighing just over 1,500 lb (680 kg) despite using a cast iron engine block.
  24 KB (3,787 words) - 21:43, 24 March 2010
• List of automotive superlatives
  *** Largest [[small-block]] V8 engine - 7.0&nbsp;L (7008&nbsp;cc/428&nbsp;in³) - [[GM LS7 engine#400 * Petrol - 22.5&nbsp;hp (16.8&nbsp;kW)/litre, 1973 [[Chevrolet Small-Block engine|Chevrolet 307]] 5.1&nbsp;L V8, 115&nbsp;hp (85.8&nbsp;kW)
  46 KB (6,094 words) - 13:24, 8 October 2009
• Ferrari 599 GTB Fiorano
  |Front Longitudinal || V12, 5999cc, petrol || Aluminum Head and Block || 92.0/75.2 mm || 11.2:1 || 4 per cylinder || {{Auto bhp|620|0}} @ 7600 r
  24 KB (3,460 words) - 15:04, 28 September 2010
• Barcelona
  ...bistro inside centuries-old stone walls in Ciutat Vella/Barri Gotic. One block in from the Correos (Big Post Office at the end of Via Laietana), "Dusk" of ...imple and good private rooms. Renovated bathrooms. Very good location, one block from the ''Plaça Reial'', two from the famous ''La Rambla''. Very good pri
  56 KB (9,123 words) - 09:23, 7 October 2009
• Module:Convert
  ...0 0.1em;">%s%s</span><span class="visualhide">/</span><span style="display:block; line-height:1em; padding:0 0.1em; border-top:1px solid;">%s</span></span>' ...g:0 0.1em;">%s</span><span class="visualhide">/</span><span style="display:block; line-height:1em; padding:0 0.1em; border-top:1px solid;">%s</span></span><
  129 KB (21,081 words) - 07:06, 6 March 2017
• Quantum of Solace
  ...strongly with [[Barbara Broccoli]] and Michael G. Wilson, but they had to block two very expensive ideas he had. "Financially, there are limits &mdash; eve
  31 KB (4,980 words) - 17:37, 10 March 2010
• Lancia Delta
  * Knock control by engine block sensor and new signal handling software that acted simultaneously on spark
  34 KB (4,989 words) - 17:46, 6 November 2012
• Alain Prost
  ...[[1988 Portuguese Grand Prix|Portuguese Grand Prix]], where Senna tried to block Prost from taking the lead by forcing the Frenchman to run close to the pit
  60 KB (8,909 words) - 11:41, 8 October 2009
• Tour de France
  ...g a helmet, received massive trauma to the top of his head from a concrete block and died on the scene.
  51 KB (7,916 words) - 16:23, 13 June 2009
• Geneva
  ...requent bus, tram, 'mouette' (boat) and suburban train service to within a block or two of most locations in the city and canton. There is also an expandin
  50 KB (8,151 words) - 14:44, 9 August 2009
• Max Mosley
  ...were doing everything for the GPCA, instead of everyone moving around in a block, and from that developed FOCA."
  41 KB (6,582 words) - 09:58, 27 September 2009
• Lancia Ardea
  This the riepilogativo picture of the measures of construction and of I block of the Ardea placed to comparison with those of second the Aprilia contempo
  56 KB (8,812 words) - 11:18, 17 September 2010
• History of Formula One
  ...ctory two years with a compact spaceframe chassis powered by the aluminium-block stock-derived [[Repco]] V8 unit. With SOHC heads and no more than 330 bhp,
  67 KB (10,614 words) - 08:56, 7 October 2009