Search results

• Lamborghini V10
  ...enter of gravity]] of the engine low. For the same reason, a [[dry-sump]] lubrication system was also used. ; Lubrication system: dry sump
  2 KB (284 words) - 11:38, 8 October 2009
• Salve
  ...ine with 496 cc, and production plans, with head, side valve of 45 mm, the lubrication had a double pump and an automatic sump motor cross section, three-speed ge
  977 bytes (137 words) - 15:55, 19 April 2010
• PO
  ...gnition, a chain driven [[GN]] three speed [[transmission]] with automatic lubrication and a front shock suspension. The ''Race'' version, had the same characteri
  1,022 bytes (138 words) - 12:07, 7 February 2011
• Babbitt metal
  ...ough the hole in the top of the pillow block cap that will eventually be a lubrication hole. ...a "run bearing" also derives from this style of bearing, since failure of lubrication will lead to heat build up due to friction in the bearing, eventually leadi
  4 KB (740 words) - 23:31, 3 July 2009
• Aprilia RS125
  ...luminium cylinder with Nikasil coated liner. Reed valve intake. Separate lubrication. Homologated to Euro 2 standards. *'''Lubrication''': Separate mixing with variable displacement, volumetric pump.
  4 KB (486 words) - 08:02, 19 April 2009
• Lancia Eta-30/50HP
  ...e value manually adjustable ; forced lubrication with pump capacity of the lubrication circuit of 9 liters, [[water cooling]], forced circulation, finned tube rad
  4 KB (553 words) - 21:23, 27 April 2009
• CBR
  ...ound the cylinder, to preheat the air. It had a Ruthardt magneto ignition, lubrication pump with an additional direct drive transmission belt with a pulley for th
  1 KB (182 words) - 22:33, 22 April 2010
• Brevetti 15-25 HP
  Equipped with a 3052 cm3 engine developing 20 hp, she opened the forced lubrication.
  2 KB (273 words) - 11:47, 12 June 2009
• Parasitic loss
  ...sible for parasitic loss. One would not consider running an engine without lubrication such as an oil pump so in this instance the oil pump is a necessary parasit
  2 KB (243 words) - 08:26, 8 October 2009
• Ferrari 288 GTO
  Lubrication: Forced lubrication, dry sump, Savara filter an radiator, 8 kg circuit
  5 KB (750 words) - 21:53, 17 August 2009
• Quota 1100 ES
  |Lubrication || Forced lube with geared pump and pressure regulator
  2 KB (275 words) - 22:58, 27 February 2009
• Roller bearing
  ...lubricant fails not because it is "without lubricant", but because lack of lubrication leads to fatigue and welding, and the resulting wear debris can cause abras ...aterials are sufficiently free of microscopic defects. Note that cooling, lubrication, and sealing are thus important parts of the bearing design.
  13 KB (2,121 words) - 07:16, 6 July 2009
• Controlled Combustion Engine
  ...d]]s), contact with the cylinder wall is minimised, which reduces wear and lubrication requirements. The cams create less piston [[shock (mechanics)|shock]], whic
  3 KB (487 words) - 22:32, 23 September 2009
• MV Agusta 125 Sohc
  * Lubrication: Geared Pressure pump
  2 KB (303 words) - 22:07, 27 July 2010
• Ferrari 512 Berlinetta Boxer
  ...was larger at 4942 cc, but power was off to 360 hp. [[Dry sump lubrication]] was used for a lower center of gravity. External differentiators include
  4 KB (611 words) - 08:24, 15 July 2009
• Nagase & Ray
  ...cc single-cylinder with side valves distribution to fly outside and forced lubrication. The change is blocking three reports and the start-up kits. Versions is gi
  3 KB (453 words) - 22:47, 18 April 2010
• Lancia Dialfa-18HP
  ...to lubricate the supports of the crankshaft, depending on speed) capacity lubrication circuit liters 15; [[liquid cooling | cooling water]] with centrifugal pump
  4 KB (489 words) - 20:23, 24 February 2009
• ISO Motorcycles
  ...engine 123 cc version two-stroke engine, which followed a separate second lubrication system and a [[transmission]] [[shaft]].
  3 KB (410 words) - 12:55, 5 October 2010

View (previous 20 | next 20) (20 | 50 | 100 | 250 | 500)