Search results

• Cargneluti
  ...he piston during the intake stroke to go down faster than during the power stroke.
  912 bytes (131 words) - 15:49, 14 October 2010
• Lancia V4 engine
  ...aluminum design. All three displacements shared the same long 120 mm stroke, and all were [[SOHC]] designs with a single camshaft serving both banks of ...|Artena]]. Bore was set at 82.55 mm as in the 2.6 L Lambda, but stroke was reduced to a more conventional 90 mm. Total displacement was 1927
  4 KB (612 words) - 16:37, 13 June 2009
• Four-stroke
  ...ne]] rather than the much more usual, [[reciprocating engine]] of the four-stroke cycle. [[image:4-Stroke-Engine.gif|framed|right|four-stroke cycle]]
  11 KB (1,765 words) - 11:04, 10 November 2005
• Four-stroke cycle
  ...ne]] rather than the much more usual, [[reciprocating engine]] of the four-stroke cycle. [[image:4-Stroke-Engine.gif|framed|right|four-stroke cycle]]
  11 KB (1,775 words) - 09:48, 2 August 2009
• Camshaft
  ...exhaust, they must be opened and closed at the appropriate time during the stroke of the piston. For this reason, the camshaft is connected to the [[cranksha ...rotates at the same rate as the crankshaft. In a [[four-stroke cycle|four-stroke engine]], the valves are opened only half as often; thus, two full rotation
  4 KB (658 words) - 19:44, 31 March 2009
• Four stroke cycle
  ...ne]] rather than the much more usual, [[reciprocating engine]] of the four-stroke cycle. [[Image:4-Stroke-Engine.gif|framed|right||Four-stroke cycle (or Otto cycle)]]
  12 KB (1,944 words) - 22:56, 14 June 2009
• Firing order
  The numbers are usually cast on the [[cylinder head]] or the intake [[manifold (automotive engineering)|manifold]] or the [[poppet valve|valve] |Saab two-stroke engine
  3 KB (418 words) - 00:27, 23 June 2009
• Two stroke
  ...iston for every engine revolution, instead of every second revolution. Two stroke engines can be arranged to start and run in either direction. Two-stroke engines are used most among the smallest and largest reciprocating powerpla
  15 KB (2,394 words) - 23:48, 11 September 2009
• Opposed piston engine
  ...roke cycle]] Diesel engines. Some attempts were made to build non-diesel 4-stroke engines, but as there is no cylinder head, the bad location of the valves a ...upper crankshaft serves the exhaust pistons, and the lower crankshaft the intake pistons. In designs using multiple cylinder banks, such as the [[Junkers Ju
  6 KB (1,020 words) - 07:50, 14 July 2009
• Poppet valve
  ..., [[four stroke cycle]], DOHC piston engine. (E) Exhaust [[camshaft]], (I) Intake camshaft, (S) [[Spark plug]], (V) Valves, (P) [[Piston]], (R) [[Connecting ''Poppet valves'' are used in most [[piston engine]]s to open and close the intake and exhaust [[cylinder head porting|ports]] in the [[cylinder head]]. The v
  5 KB (840 words) - 08:50, 8 October 2009
• Lamborghini V10
  ; Cylinders : Bore × stroke 82.5 mm x 92.8 mm (0.89 ratio), 496 cc/cylinder, aluminium block with integ ...chain driven camshafts, continuously variable valve timing system both for intake and exhaust
  2 KB (284 words) - 11:38, 8 October 2009
• Two-stroke cycle
  ...iston for every engine revolution, instead of every second revolution. Two-stroke engines can be arranged to start and run in either direction. [[Image:Arbeitsweise Zweitakt.gif|center|thumb|500px|A two-stroke engine with an expansion pipe illustrating the effect of the reflected pres
  19 KB (3,049 words) - 09:48, 2 August 2009
• Alfa Romeo Twin Spark engine
  ...y utilising a "wasted spark" system, where - between the exhaust and inlet stroke of each pistons "partner" - a useless spark occurs, this may improve emissi ...der normal operation, the [[Variator|Camshaft Phase Variator]] and the air intake Variable Inlet Control on the 1.8 and 2.0 litre versions.
  6 KB (883 words) - 22:36, 14 June 2009
• Crankshaft
  ...ts to a [[flywheel]], to reduce the pulsation characteristic of the [[four stroke cycle]], and sometimes a torsional or vibrational damper at the opposite en ...es as current [[Honda]] engines are classified as long-stroke, in that the stroke is larger than the diameter of the [[cylinder bore]]. In production [[V eng
  7 KB (1,012 words) - 23:56, 20 September 2009
• Amisa
  In 1946, Peter Vassena designed a 125 cc two-stroke with the intake rotary valve small horizontal cylinder engine mounted on the frame and AMIS
  1 KB (162 words) - 23:50, 5 August 2011
• Lancia motorcycle
  ...al gears, a two-stroke engine, with air suction in the crankcase where the intake air is pure was to help to keep the gas cool in the cylinder with the aim o
  1 KB (172 words) - 02:39, 6 January 2011
• Ferrari Dino engine
  ...ari Dino#286 SP|286 SP]]. The latter had a 90 mm bore and 75 mm stroke for 2863 cc and 260 hp (194 kW). ...anifold|intake tracts]]. The Ferraris were convinced that a freer-flowing intake could result in more power, so a new design was called for.
  14 KB (2,144 words) - 23:23, 21 September 2008
• CBR
  ...arberis and Ruba by starting to produce a patented bike, with a 250 cc two-stroke engine and a direct drive transmission belt. According to the advertising o ...presented a new model with a 500 cc engine, with a carburetor with the air intake around the cylinder, to preheat the air. It had a Ruthardt magneto ignition
  1 KB (182 words) - 22:33, 22 April 2010
• Aprilia RS125
  ...plica sport production motorcycle. It is powered by a single cylinder [[2-stroke]], [[Nikasil]] coated aluminium cylinder block, liquid cooled 124.8cc [[Rot Aprilia has had many Grand Prix victories in the 125cc and 250cc 2-stroke classes. With years of racing experience, Aprilia has released a new versi
  4 KB (486 words) - 08:02, 19 April 2009

View (previous 20 | next 20) (20 | 50 | 100 | 250 | 500)