Search results

...''Lambo doors''', are [[automobile]] doors that rotate up and forward on a hinge near the front of the door. ...can open upward rather than outward, which is important in wide cars. The hinge is in a similar location as a conventional door, so a [[convertible]] versi

...ach piece. They are flexible enough that, even if they are all on the same hinge, several can be stacked together to gauge intermediate values. It's common

...ace'' type. The following joint types exist: [[revolute joint]] ("pin", "[[hinge]]"), [[prismatic joint]] ("slider"), [[cylindrical joint]], [[screw joint]]

...ms, king pins, tie rods, etc. as does four-wheel steering. If the vertical hinge is placed equidistant between the two axles, it also eliminates the need fo

...ws the rod to 'bend' in any direction. It consists of a pair of ordinary [[hinge]]s located close together, but oriented at 90° relative to each other.

...n inch or so above the title page). By pivoting the upper block around the hinge point, the V_c (imagine the air between the front cover of the bo

'''Suicide doors''' are [[automobile]] [[door]]s that are [[hinge]]d on the trailing edge; the edge closer to the rear of the vehicle. The te

...nders were also lengthened, as were the doors, which were also reversed to hinge at the rear. The result was a car that looked totally up to date.

...ent” chain to seams, to double bending (an external pinion, to oscillating hinge, renders it always stiff) ...ent” chain to seams, to double bending (an external pinion, to oscillating hinge, renders it always stiff)

...ent” chain to seams, to double bending (an external pinion, to oscillating hinge, renders it always stiff) ...ent” chain to seams, to double bending (an external pinion, to oscillating hinge, renders it always stiff)