Search results

• Straight-14
  ...ht-14''' engine is a [[straight engine]] with fourteen [[cylinder (engine)|cylinder]]s. A straight-14 is a very long engine, and therefore only used for large ...es 25,480 L (1,556,002 in³) with a 38 in (.965 m) bore and 98 in (2.5 m) stroke. The engine is 89 ft (27.1 m)
  1,022 bytes (156 words) - 00:30, 23 June 2009
• Cylinder
  [[Image:cylinder.png|frame|right|A piston and cylinder from a steam engine]] ...er spaces. A cylinder block sits between the engine [[crankcase]] and the cylinder head, translating the [[reciprocal|reciprocating]] motion of the pistons in
  3 KB (441 words) - 19:45, 31 March 2009
• Short block
  ...thin specification. Block cracks and holes can be repaired by pinning, the bore can be honed to the next oversize, and the crankshaft saddles can be line b ...the journals are within specification. The crankshaft is installed in the cylinder block using new main bearings and thrust washers, and the main bearing caps
  2 KB (278 words) - 22:48, 11 June 2009
• Lancia V4 engine
  The Lambda engine was updated for the [[Lancia Artena|Artena]]. Bore was set at 82.55 mm as in the 2.6 L Lambda, but stroke was reduce ...8]], the Augusta's engine displaced just 1196 cc with a 69.85 mm bore and 78 mm stroke. Power output was 35 hp (26 kW) at 4000&nb
  4 KB (612 words) - 16:37, 13 June 2009
• Cylinder (engine)
  [[Image:cylinder.png|frame|right|A piston and cylinder from a steam engine]] ...s rigid. The cylinder block sits between the engine [[crankcase]] and the cylinder head, translating the [[reciprocal|reciprocating]] motion of the pistons in
  3 KB (492 words) - 00:06, 8 August 2009
• Ferrari Lampredi engine
  ...racing courses. Lampredi built a prototype with [[multivalve|4 valves per cylinder]] and 2493 cc of displacement. It produced 175 hp on the test be ...marvel for the time with [[dual overhead camshaft]]s pushing 2 valves per cylinder and twin-plug ignition.
  8 KB (1,137 words) - 16:43, 13 June 2009
• Ducati 800 SPORT
  ...ir cooled, four stroke, 90°“L”twin cylinder, SOHC, desmodromic 2 valve per cylinder. *Bore x Stroke -- 88 x 66 mm
  992 bytes (130 words) - 15:16, 10 December 2007
• Ducati 851
  ...otor Holding|Ducati]] [[motorcycle]], with liquid cooling and four valve [[Cylinder head|heads]], released to the public in [[1987]]. Development had lagged wi ...le the heads and valves remained the same; designed to fit above the 88 mm bore of a 748 cc version.
  3 KB (386 words) - 11:33, 14 June 2009
• Fiat 519
  *Engine Type: Capacity Config Model Bore/Stroke CR *Cylinder: 12 valves total 2 valves per cylinder
  3 KB (356 words) - 16:06, 10 March 2009
• Piston
  ...[[plug]] that fits closely inside the [[bore]] of a [[cylinder (geometry)|cylinder]]. ...nclosed by the cylinder, or to exert a [[force]] on a [[fluid]] inside the cylinder.
  2 KB (354 words) - 08:11, 8 October 2009
• Bugatti Prototypes
  ...(1493 cc/91 in³) [[straight-8]] engine. With a 60 by 66 mm bore and stroke, the engine later found a place in the [[Bugatti Type 35#Type 39 The [[V16|16-cylinder]] '''Type 45''' racing car and similar '''Type 47''' "Grand Sport" were to
  4 KB (711 words) - 14:25, 4 August 2009
• Bugatti Type 18
  ...] and a [[single overhead cam]]shaft. This large engine had a 100 mm bore and very long 160 mm stroke, so it could only rev to about 2800 r
  1 KB (153 words) - 11:18, 14 June 2009
• Ferrari Colombo engine
  ...ers with a 60° angle between the two banks. The engine had two valves per cylinder fed through three Weber 30DCF [[carburettor]]s. A 7.5:1 [[compression rati ...ired to compete with the strong eight-cylinder [[Alfa Romeo 158]] and four-cylinder [[Maserati 4CLT]]. Strong driving and a nimble chassis, however, allowed t
  7 KB (1,080 words) - 23:07, 7 August 2009
• Piston ring
  # Supporting heat transfer from the piston to the cylinder wall. ...n ring compresses to a few thousandths of an inch when inside the cylinder bore.
  6 KB (1,010 words) - 09:55, 25 September 2009
• Square engine
  The '''square engine''' is an [[engine configuration]] used on some 4-cylinder motorcycles like the [[Ariel Ltd|Ariel]] Square Four. Its easiest to think An engine can also be referred to as "square" when the bore and stroke are exactly equal. See [[Oversquare]] and [[Undersquare]] articl
  1 KB (168 words) - 16:17, 13 June 2009
• Lamborghini V10
  ...lve/cylinder layout favored by the Italian firm rather than the five valve/cylinder variation used by the German members of VAG - including Audi and [[Volkswag ; Cylinders : Bore × stroke 82.5 mm x 92.8 mm (0.89 ratio), 496 cc/cylinder, aluminium block with integrated liners with eutectic alloy
  2 KB (284 words) - 11:38, 8 October 2009
• MV Agusta 500 Three
  | Engine || Four stroke [[Straight-three engine|Inline three cylinder]] ...of MV Agusta's highly successful 350 cc [[Straight-three engine|three cylinder]]. Its production lasted until 1974.
  2 KB (323 words) - 16:39, 27 July 2010
• Conti
  ...a Ferrera [[two-stroke]] 125 cc [[engine]], with a doubled [[cylinder]], [[bore]] (36 mm) and [[stroke]] (60 mm), with a maximum power of 3 [[HP]], a two s ...aust]] but in 1930 opted for a new [[Jap]] engine with four-stroke, single cylinder 175 cc with side valves for the 175 Sport bike. In 1931 they presented the
  2 KB (291 words) - 08:30, 20 August 2009
• Bugatti Type 49
  The early [[Bugatti]] 8-cylinder line began with the [[1922]] '''Type 30'''. The same basic design was used ...], about 470 examples were built. The Type 49 was the last of the early 8-cylinder Bugatti line which began with the Type 30, though its gearbox would later b
  4 KB (534 words) - 21:27, 31 July 2009
• Bugatti Type 30
  The early [[Bugatti]] 8-cylinder line began with the [[1922]] '''Type 30'''. The same basic design was used ...], about 470 examples were built. The Type 49 was the last of the early 8-cylinder Bugatti line which began with the Type 30, though its gearbox would later b
  4 KB (552 words) - 11:10, 14 June 2009
• Ambrosini
  *Bore x Stroke : 57 x 58 mm *Type of the engine : 2 stroke, One-cylinder
  832 bytes (112 words) - 22:45, 30 March 2010
• Benelli 250 2C
  |Engine type || Single cylinder |Bore x stroke || 74.0 x 57.0 mm (2.9 x 2.2 inches)
  2 KB (183 words) - 16:21, 13 October 2009
• W engine
  The '''W engine''' is an [[engine configuration]] in which the cylinder banks resemble the letter '''W''' in the same way a [[V engine]] resembles ...n bank pairs makes this resemble a [[V12 engine]], in that it has just two cylinder heads and two sets of [[camshafts]].
  6 KB (935 words) - 00:15, 8 August 2009
• GP
  ...ne was a single cylinder, mounted horizontally, with four strokes, 216 cc, bore and stroke mm 65 x 65, 2 HP, forced oil cooling, “Bosh” magneto, B.B. (
  1 KB (156 words) - 20:53, 20 January 2011
• Bugatti Type 50
  ...The engine was [[undersquare]] like most Bugatti designs with a 81 mm bore and 130 mm stroke.
  2 KB (335 words) - 11:17, 14 June 2009
• DC
  ...an old warehouse was a 2-stroke single cylinder, 125 cc, with a 53 x 56 mm bore and stroke, “Eisemann” magneto, “Longuemare” carburetor, and a two - twin cylinder, two stroke, 125 cc engine “Della Ferrera”, bore and stroke mm 36 x 60, Aluminium head, steel piston, flywheels and camshaft
  4 KB (552 words) - 01:06, 5 August 2011
• Four-stroke
  ...alternately, back and forth, of a [[piston]] inside a [[cylinder (engine)|cylinder]]: ...take'') of the piston, a mixture of [[fuel]] and [[air]] is drawn into the cylinder through the intake (inlet) port. The intake (inlet) [[poppet valve|valve]]
  11 KB (1,765 words) - 11:04, 10 November 2005
• Vassena
  ...ate'') produced [[bicycle]] [[motors]] with 125 cc two-stroke horizontal [[cylinder]] and a two-tier [[transmission]] by [[Ideal]] was launched by [[Pietro Vas ...nufacturers, this was the first time that they had a complete machine that bore his name. He moved to [[Lecco]] and decided to mass-produce the [[motorcycl
  1 KB (166 words) - 14:27, 20 April 2010
• Four-stroke cycle
  ...alternately, back and forth, of a [[piston]] inside a [[cylinder (engine)|cylinder]]: ...take'') of the piston, a mixture of [[fuel]] and [[air]] is drawn into the cylinder through the intake (inlet) port. The intake (inlet) [[poppet valve|valve]]
  11 KB (1,775 words) - 09:48, 2 August 2009
• Romeo Autotutto
  ...two valves per. cylinder. The engine block and cylinder head of aluminum. Bore 74 mm. Stroke 75 mm. Capacity 1290 cm3. Maximum power 52.3 hp v/5.200 o / m ...hp at 2,800 rpm, which gave a top speed of 75 km/h. Petrol engine was a 4-cylinder line with two chain-driven, overhead camshafts, a compression of only 7,5:1
  5 KB (715 words) - 10:10, 3 June 2009
• Ducati 998
  ...] 4 valve per cylinder [[desmodromic valve|desmodromic]], liquid cooled<br>Bore x stroke: 100.0&nbsp;mm x 63.5&nbsp;mm ...Testastretta means narrow head and refers to a complete redesign of the [[cylinder head]]s. The [[desmodromic]] valve actuation method was retained.
  4 KB (559 words) - 22:12, 9 November 2010
• Lancia Dialfa-18HP
  ...second model built by Lancia, produced in 1908. The car was based on four cylinder [[Lancia Alfa-12HP|Lancia Alfa]], now with straight-6 engine. With 40 hp it ...ribution (mechanical )|distribution]] a parallel side valves (2 valves per cylinder) driven by a [[cam]] side (in the basement) driven by gears, drive shaft su
  4 KB (489 words) - 20:23, 24 February 2009
• Ferrari Dino engine
  ...|196 SP]] and [[Ferrari Dino#286 SP|286 SP]]. The latter had a 90&nbsp;mm bore and 75&nbsp;mm stroke for 2863&nbsp;cc and 260&nbsp;hp (194 kW). ...trios creativity was the world's only 65° V6 engine. The extra 5° between cylinder banks gave Ferrari the straight intakes he wanted, but resulted in an odd 1
  14 KB (2,144 words) - 23:23, 21 September 2008
• Ducati 1000 DS
  |Type || L-twin cylinder, 2 valves per cylinder Desmodromic; air cooled |Bore x Stroke || 94 x 71.5 mm
  3 KB (331 words) - 18:47, 2 March 2009
• Ducati ST3
  |Type || L-twin cylinder, 3 valves per cylinder Desmodromic; liquid cooled |Bore x Stroke || 94 x 71.5 mm
  3 KB (339 words) - 14:54, 24 February 2009
• Bandini 1100 (1946)
  * [[Engine]]: forward longitudinal, 4-cylinder in-line auctions and bilanceri * [[Bore]] and [[race (mechanical) |Stroke]]: 68 mm x 75 mm
  2 KB (314 words) - 22:26, 23 September 2009
• Radial engine
  ...tion]] of [[internal combustion engine]], in which the [[cylinder (engine)|cylinder]]s are arranged pointing out from a central [[crankshaft]] like the spokes ...nnected to the crankshaft with a master-and-articulating-rod assembly. One cylinder has a master rod with a direct attachment to the crankshaft. The remaining
  7 KB (1,042 words) - 00:15, 8 August 2009
• Aprilia RS125
  ...is powered by a single cylinder [[2-stroke]], [[Nikasil]] coated aluminium cylinder block, liquid cooled 124.8cc [[Rotax]] engine. Liquid cooled, single cylinder two stroke. Aluminium cylinder with Nikasil coated liner. Reed valve intake. Separate lubrication. Homo
  4 KB (486 words) - 08:02, 19 April 2009
• Ducati 1098
  |Engine || 1098: 1099&nbsp;cc bore/stroke: 104 x 64.7 mm<br> 1098 R: 1198&nbsp;cc bore/stroke: 106mm x 67.9mm <br>
  5 KB (743 words) - 10:47, 14 March 2009
• Four stroke cycle
  ...manufacturing expertise. Moreover, it is more easily manufactured in multi-cylinder configurations than the two-stroke, making it especially useful in high-out ...alternately, back and forth, of a [[piston]] inside a [[cylinder (engine)|cylinder]]:
  12 KB (1,944 words) - 22:56, 14 June 2009
• Alfa Romeo Canguro
  |Valves per Cylinder || 2 (toplam 8 adet) |Bore || 78 mm (3.07 in)
  4 KB (592 words) - 07:36, 22 June 2016
• Bandini 1100
  ...to whom Bandini adapted cutting a head [[DOCH]] from [[Alfa Romeo]] six 8-cylinder. The [[Distribution (mechanical) | distribution]], compulsorily amended as * Positioning: forward longitudinal, 4-cylinder in-line
  5 KB (619 words) - 22:26, 23 September 2009
• Crankshaft
  ...g-stroke, in that the stroke is larger than the diameter of the [[cylinder bore]]. In production [[V engine|V]] or [[flat engine|flat]] engines, neighborin ...power pulses by using a crankshaft with an individual crank throw for each cylinder, spaced so that the pistons are actually phased 60 degrees apart, as in the
  7 KB (1,012 words) - 23:56, 20 September 2009
• Ducati 999
  ...led, four stroke, 90° "L" twin cylinder, DOHC, desmodromic four valves per cylinder ...ooled, four stroke, 90°“L”twin cylinder, DOHC, [[desmodromic]] 4 valve per cylinder.
  5 KB (636 words) - 10:48, 14 March 2009
• Reciprocating engine
  ...pes the expanded or "[[Exhaust gas|exhausted]]" gases are removed from the cylinder by this [[Stroke (engines)|stroke]]. The exception is the Stirling engine, In some designs the piston may be powered in both directions in the cylinder in which case it is said to be [[Steam_power#Double-acting_pistons|double a
  9 KB (1,400 words) - 18:37, 9 August 2011
• Aermoto
  *Bore x Stroke : 48 x 54 mm *Type of the engine : 2 stroke, One-cylinder
  2 KB (237 words) - 10:07, 13 December 2010
• Girardengo
  ...|250px|'''Girardengo motoleggra 125 cc<br>Single cylinder two speed, 52 mm Bore, 4.5 HP at 4800 rpm<br> with Dell' Orito 16 MA carbs with [[Marelli]] Ignit
  2 KB (220 words) - 21:36, 17 December 2016
• Vespa 400
  | Engine || 393&nbsp;cc, 2-cylinder, [[Two-stroke cycle|Two-stroke]] ;Engine: Two cylinder, two stroke, air cooled. Bore, stroke: 63 mm x 63 mm (392 cc).
  4 KB (563 words) - 22:47, 12 December 2016
• Lancia Eta-30/50HP
  ...e alloy d '[[aluminum]], a distribution parallel side valves (2 valves per cylinder) operated by a [[camshaft]] side (in the basement) operated by [[gears]]; c
  4 KB (553 words) - 21:23, 27 April 2009

View (previous 50 | next 50) (20 | 50 | 100 | 250 | 500)