Search results

• De Rosa Corum
  ==Steel Frame == ...e "regular" geometry, and from 44 to 57 in the latest slope version. Every frame has a steering tube with "integrated" caps, which we combine with a specifi
  618 bytes (101 words) - 10:41, 12 February 2009
• Bodywork
  In vehicles with a frame or [[chasis]], the term ''bodywork'' is normally applied to only the non-st ...horse-drawn vehicles, and had [[body-on-frame]] construction with a wooden frame and wooden or metal body panels. Wooden-framed motor vehicles remained in p
  2 KB (319 words) - 15:11, 25 September 2009
• Subframe
  ...raft]], that uses a discrete, separate structure within a larger [[body-on-frame]] or [[monocoque|unit body]] to carry certain components, such as the [[eng # A perimeter frame which carries the above components but in addition supports the engine.
  2 KB (292 words) - 15:48, 3 February 2009
• Cagiva Tamanaco
  ...ston), the new frame, in steel, but revised, the new swingarm always boxed steel but revised forks are reversed, is introduced to the brake disc to the rear
  1 KB (178 words) - 22:53, 28 January 2009
• Guerciotti
  ...ion manager. Guerciotti continues to produce high-end frames from Columbus steel.
  634 bytes (79 words) - 23:10, 16 August 2008
• Cagiva 1C2
  ...or power line and a rotating disk with frame-type double cradle round tube steel as the swingarm. ...g the rotating discs to the sides of the casing as the competitors and the frame became a square tubes, the motion received little success, although in 1982
  1 KB (225 words) - 21:47, 28 January 2009
• Cagiva 3C2
  ...or power line and a rotating disk with frame-type double cradle round tube steel as the swingarm. ...g the rotating discs to the sides of the casing as the competitors and the frame became a square tubes, the motion received little success, although in 1982
  1 KB (225 words) - 21:52, 28 January 2009
• Cagiva 2C2
  ...or power line and a rotating disk with frame-type double cradle round tube steel as the swingarm. ...g the rotating discs to the sides of the casing as the competitors and the frame became a square tubes, the motion received little success, although in 1982
  1 KB (221 words) - 21:52, 28 January 2009
• Ducati 750 SS
  *Frame Tubular -- steel trellis
  618 bytes (90 words) - 23:24, 14 June 2009
• Ducati 620 SPORT
  *Frame -- Steel trellis
  670 bytes (100 words) - 11:59, 19 November 2008
• Ducati 900 SS
  *Frame -- Steel trellis
  616 bytes (90 words) - 08:38, 17 November 2008
• Ducati 748S
  *Frame -- Steel trellis
  699 bytes (101 words) - 13:39, 19 November 2008
• Basso
  ...ed bikes. Their best features include dual pivot brakes and a strengthened frame (around the drop outs and bottom bracket).
  664 bytes (92 words) - 10:49, 29 September 2014
• Faini
  ...ecame the hart of many mopeds, even a "for the ladies" model with open top frame was available. Before the closing of the Brand and final distribution, they
  1 KB (157 words) - 10:05, 30 June 2009
• Ferrario
  ...-road vehicle was small and built on a contemporary profiled torpedo steel frame used a [[Fiat 500]] F engine, combined with the transmission and gearbox of
  1 KB (160 words) - 11:49, 20 July 2009
• Body-on-frame
  ...y. The original frames were made of wood (commonly [[ash tree|ash]]), but steel '''ladder frames''' became common in the [[1930s]]. ...requent changes in [[automobile design]] made it necessary to use a ladder frame rather than [[monocoque]] to make it possible to change the design without
  3 KB (455 words) - 09:10, 7 October 2009
• Somec
  ...his society. Today, every SOMEC frame is made in Lugo, and is crafted from steel or aluminum. SOMEC still makes less frames in a year than a mass producer m
  1 KB (189 words) - 15:40, 29 March 2010
• Colnago
  ...ogo. In the late 1970s, some lower end models were produced, using heavier steel than the high end bikes. Since the 1980s, Colnago has continued to produce high-end steel bikes, and has branched out into other materials, working with [[Ferrari]]
  7 KB (1,076 words) - 15:41, 14 May 2009
• Spaceframe
  [[Image:SpaceFrame02.png|right|thumb|250px|Simplified space frame roof with the half-octahedron highlighted in blue]] ...s. They derive their strength from the inherent rigidity of the triangular frame; flexing [[load]]s (bending [[moment (physics)|moments]]) are transmitted a
  4 KB (614 words) - 21:33, 31 July 2009
• Bandini 1100 (1946)
  ...] are placed next to [[differential (mechanical) | differential]] set to [[frame]] for [[suspension (mechanical) | suspensions]] are used elastic elements d
  2 KB (314 words) - 22:26, 23 September 2009
• Iso Grifo 90
  ...s ever built. The [[aluminium]] body was fitted to a tubular steel chassis frame. Double [[wishbones]] and disc brakes were fitted all round.
  718 bytes (113 words) - 19:56, 25 April 2010
• Ducati Mach 1
  | Frame || Single, open cradle frame in tubular steel
  2 KB (278 words) - 12:19, 18 April 2009
• Columbus
  ”I want to do business in iron and steel and make a fair and honest profit,” wrote [[Angelo Luigi Colombo]], aged ...oduction. In 1931, the company was able to manufacture welded and seamless steel tubes used for the production of bicycles motorcycles (Guzzi was winning wi
  7 KB (1,007 words) - 21:55, 17 August 2009
• Azzara
  ...pany built an interesting bike, branded Azzarra, with the frame pressed of steel, removable saddle tank and a front 'wishbone' fork and used a Blackburne 70
  863 bytes (119 words) - 01:29, 24 January 2011
• Covini T40 Turboboost
  |Chassis || steel-frame |Body || 4 seater coupé, vtr and steel
  1 KB (167 words) - 12:30, 4 May 2010
• Ducati M620 Monster
  |Frame || Tubular steel trellis |Color combinations || (Tank-Frame-Wheels) (glossy black-black-black) (red-red-black) (metallic dark grey-meta
  3 KB (337 words) - 10:53, 14 March 2009
• Ducati 1000 DS
  |Frame || Tubular steel trellis |Color combinations || (Tank-Frame-Wheels) (red-red-black)
  3 KB (331 words) - 18:47, 2 March 2009
• Lambretta (company)
  ...[[Skinheads]]. The Lambretta had unibody chassis pressed from sheets of steel, the early versions being available in 'closed' (fully covered mechanicals) ...The Lambretta had tubular steel frame and panelwork pressed from sheets of steel, the early versions being available in 'closed' (fully covered mechanicals)
  4 KB (584 words) - 21:50, 17 August 2009
• Bandini 1000 V
  The [[frame]], a frame of special steel tubes, comes directly from that of ''[[Bandini 1000 | 1000/66]]'', although ...ure and [[material]]: frame of elliptical and round section tubes, special steel aeronautics derivation; engine semiportante
  5 KB (689 words) - 22:30, 23 September 2009
• Ducati ST3
  |Frame || Tubular steel trellis |Color combinations || (Tank-Frame-Wheels) (red-red-black) (Senna grey-metallic grey-fluorescent red)(*black
  3 KB (339 words) - 14:54, 24 February 2009
• Ducati 999R Xerox
  |Platform || trellis frame ...9,750 rpm is the most power ever to grace a production Ducati trellis frame, until the subsequent 1098 model. The performance gain compared to other 99
  5 KB (742 words) - 18:22, 22 February 2009
• Ducati Monster 696
  | Frame || Tubular steel trellis frame * Trellis frame mounts to an aluminum subframe
  3 KB (311 words) - 23:30, 9 November 2010
• Bandini 1300
  The frame is an evolution of [[Bandini s.p. 1000 | 1000 sports prototype]] that has g ...ial]]: frame of mixed section tubes round and rectangular tubes, special [[steel]]
  4 KB (499 words) - 22:31, 23 September 2009
• Lancia Eta-30/50HP
  ...dth 133 cm, length 405.5 cm frame, the frame width 161.5 cm, weight of the frame, in order ride, 880 Kg
  4 KB (553 words) - 21:23, 27 April 2009
• Ducati 1198
  ! Frame | colspan="3" | Tubular steel Trellis frame in ALS 450
  6 KB (788 words) - 11:15, 14 March 2009
• IMN
  ...oller [[transmission]]. The moped has an open single beam frame in stamped steel. Beside that, it also built a 100 cc lightweight motorcycle, the Bay, four- ...with a pedal block and final [[drive shaft]] with bevel helical teeth. The frame was tubular trellis with an overhanging engine, [[telescopic]] front [[fork
  2 KB (319 words) - 11:14, 18 December 2016
• Turchetti
  ...inder engine. The spaceframe chassis of the Turchetti Raptus was made from steel and chromium-molybdenum, and was covered by a lightweight body formed from ...ves of an automobile era lost when in those days a small engine, a tubular frame, and experienced mechanical on a car in a jiffy, a small body that, thanks
  1 KB (213 words) - 16:25, 3 May 2010
• Aprilia RS50
  ;Frame Cast aluminium, reinforced box section, sloping twin-spar frame.
  3 KB (440 words) - 17:26, 13 October 2009
• Romeo Autotutto
  |Build || Chassis frame made of steel with a body of steel. Lang Landscape engine in front. Gearbox, located at the engine. Front whee |Wheels || Steel Rim of the diagonal in size 6.00-16 or 6.40-16.
  5 KB (715 words) - 10:10, 3 June 2009
• Aprilia RXV
  ==Frame/chassis== ...ion of tubular steel and aluminum plates. The compact engine fits into the frame in such a way that the air filter sits on top of the engine, below the gas
  3 KB (462 words) - 17:35, 13 October 2009
• Bandini GT
  The frame of ''750 Bandini GT'' comes directly from that of [[Bandini 750 sports torp * Structure and [[material]]: frame of elliptical section tubes, special [[steel]] aeronautics derivation;
  3 KB (468 words) - 11:08, 15 June 2009
• Ferrari 159
  Like the 125, the 159 used a steel tube-frame chassis with longitudinal and cross members and had a [[double wishbone]] s
  2 KB (328 words) - 22:33, 10 March 2009
• Garanzini
  ...eed gearbox, swivel headlights, independent suspension and a tubular steel frame. The project was however not launched and there was no mass production.
  1 KB (217 words) - 01:20, 28 November 2010
• Ducati 749/R/S
  |Frame || Tubular steel trellis |Colour combinations || (Tank-Frame-Wheels) (red-red-black) (black-black-black)
  5 KB (652 words) - 16:12, 19 December 2009
• Ducati 749
  * Frame: Tubular steel trellis * Colour combinations (tank-frame-wheels): Red-Red-Black, Black-Black-Black)
  4 KB (498 words) - 10:46, 14 March 2009
• Ducati 125 S
  ...from 1956 to 1960, featuring a singular down-tube frame full cradle steel frame and full-width drum brakes.
  2 KB (311 words) - 12:46, 25 November 2011
• Autobianchi Stellina
  ...utside panels made of [[fiberglass]] reinforced plastics, based on a steel frame. It was the first Italian car with a fiberglass body, and one of the first
  2 KB (318 words) - 13:37, 17 April 2009
• Cylinder
  [[Image:cylinder.png|frame|right|A piston and cylinder from a steam engine]] ...ston in machined grooves. These rings are made of some variety of [[spring steel]] which makes positive contact with the hard walls of the sleeve (this cont
  3 KB (441 words) - 19:45, 31 March 2009
• Cagiva Freccia
  ...rcycle road fairing much: not only do not see either the [[engine]] or the frame but also the [[tank]] was completely covered. ...with square tube integrated (in one piece), and [[swingarm]] is back with steel arms symmetrical rectangular, the forks are 35 mm with a stroke of 140 mm,
  7 KB (1,258 words) - 23:11, 28 January 2009
• Ferrari 159 S
  Like the 125, the 159 used a steel tube-frame chassis with longitudinal and cross members and had a [[double wishbone]] s
  3 KB (375 words) - 22:35, 10 March 2009
• Quota 1100 ES
  |Frame || Twin steel rectangular spine w/detachable engine
  2 KB (275 words) - 22:58, 27 February 2009
• Ducati PaulSmart1000LE
  ...are very reminiscent of the race winning 750 Imola Desmo. A green finished frame, outboard dampers and wire spoked rims with special [[Pirelli]] Phantom tir The chassis consists of a tubular steel trellis. For the suspension, an [[Öhlins]] 43 mm upside-down fully ad
  2 KB (375 words) - 11:52, 17 March 2008
• Bandini s.p. 1000
  The [[frame]], while maintaining continuity in particular as regards the choice of syst ...aterial]]:frame of mixed: square, round and rectangular tubes in special [[steel]]
  5 KB (655 words) - 22:30, 23 September 2009
• Fial
  ...y the adoption of a [[radiator]] a radiator with a fan powered by a spring steel. This small two-seater car had a wheelbase of 1990 mm and [[track]] of 1093
  3 KB (471 words) - 10:05, 18 November 2011
• Monocoque
  ...aircraft were built up from an internal frame, typically of [[wood]] or [[steel]] tubing, which was then covered (or ''skinned'') with [[cloth|fabric]] to ...]. The popular [[Volkswagen Beetle]] also used a semi-monocoque body (its frame required the body for support) in [[1938]].
  5 KB (829 words) - 10:46, 8 October 2009
• Lancia Dialfa-18HP
  ...3.5 cm, 133 cm front carriageway road back 133 cm, length and width of the frame 421.5 cm and 161.5 cm respectively; weight of the chassis, in running order
  4 KB (489 words) - 20:23, 24 February 2009
• Ducati 851
  The 1987 – 1988 Ducati 851 Strada used the signature steel tube trellis frame, adorned with Marvic wheels, Brembo brakes and Marzocchi suspension. That f
  3 KB (386 words) - 11:33, 14 June 2009
• Mondonico
  ...ico]] and his brother Angelo, the Mondonicos have been personally building steel, lugged frames with their own hands (to see some photos from this era, clic ...Columbus]] and [[Falck]] tubing. The special characteristic of Mondonico [[frame]] building, the use of pins to secure the joints instead of a tack braze, h
  15 KB (2,490 words) - 14:00, 11 February 2009
• Bandini
  ...t Bandini used a modified [[Fiat 1100]] engine, cradled in a tubular steel frame with a hand-hammered aluminum body. Many other post-war Italian sports car ...957 Sport International. It was a two-seat sports car with a tubular steel frame and room for engines of up to 1.0 liter. The design of the car body was ver
  4 KB (666 words) - 01:48, 27 June 2012
• Bandini Saloncino
  ...n the recent progenitrice ''1000/66'', is realized with a new structure of frame tubes in which the engine takes increasingly function. Included in the subs * Structure and [[material]]: frame of elliptical section tubes, special steel aeronautics derivation; patent No. 499843
  5 KB (714 words) - 22:28, 23 September 2009
• Ducati 98
  ...le|single-cylinder]] [[OHV]], [[Motorcycle frame|open-cradle pressed-steel frame]] motorcycles made by [[Ducati Meccanica]] from 1952 to 1958. The '''98 Sp ...as presented at the same show, a lighter bike with alloy instead of chrome steel rims, and a higher state of tune, and the addition of a finned oil cooler a
  6 KB (906 words) - 13:14, 4 December 2010
• Cylinder (engine)
  [[Image:cylinder.png|frame|right|A piston and cylinder from a steam engine]] ...ston in machined grooves. These rings are made of some variety of [[spring steel]] which makes positive contact with the hard walls of the sleeve (this cont
  3 KB (492 words) - 00:06, 8 August 2009
• Ducati 800SS
  | Platform || Trellis frame ...rom the range some time later). The alloy swinging arm was replaced with a steel item; the five-spoke Marchesini wheels were replaced by three-spoke wheels
  4 KB (625 words) - 21:55, 9 November 2010
• SIM
  ...arbox and a torsional transmission shaft. The front suspension of the tube frame had a double lower biscuit, with coil springs, the rear suspension is a swi
  2 KB (302 words) - 08:22, 20 December 2009
• Ferves
  ...ngular section, which are set riveted panels that form the compact body in steel plate. The windshield is adjustable forward as the classic Jeep and could b
  3 KB (465 words) - 20:36, 7 October 2010
• Ducati 800 SS
  | Platform || Trellis frame ...rom the range some time later). The alloy swinging arm was replaced with a steel item; the five-spoke Marchesini wheels were replaced by three-spoke Brembos
  5 KB (643 words) - 21:45, 26 September 2009
• Bandini 1000
  The [[frame]], designed and built by Ilario Bandini, is a development based on experien * Structure and [[material]]: frame of elliptical section tubes, special steel aeronautics derivation; patent No. 499843
  4 KB (615 words) - 22:30, 23 September 2009
• Tasso
  |Body Work || Structure in steel tubes with removable front sottotelaio ...ies with Euro 2, whose reliability and widely proven. The frame is made of steel and aluminium to obtain a high resistance in the event of collision and a w
  3 KB (445 words) - 19:13, 6 February 2011
• Bandini formula junior
  [[Image:Telaio_bandinijunior.jpg|250px|thumb|The trellis frame tubes]] ...r the same purpose but implemented through a new merger and secured to the frame. This also made it possible adjustment of the angles characteristic of rear
  6 KB (869 words) - 11:39, 24 December 2016
• Ducati 1098
  |Frame || Tubular steel trellis frame
  5 KB (743 words) - 10:47, 14 March 2009
• Maserati Type 61
  ...[[chassis]], containing about 200 [[chromium|chro]]-[[molybdenum|moly]] [[steel]] tubes welded together, hence the nickname "Birdcage". This method of cons ...ieri]] designed 5 different models, all based on an intricate multitubular frame concept. All models included independent front wheels, de Dion rear axle, 4
  5 KB (648 words) - 14:04, 3 May 2010
• Molaroni
  ...vertical single cylinder. The cylinder and piston were rod iron and on the steel to nickel head, the roller bearings and crankshaft were one piece. The tran ...ith distribution valves in the head, a three-speed trasmission and a tubed frame with shocks on the front fork. The ''Touring'' speed was around 85 km/h, th
  2 KB (337 words) - 13:18, 21 January 2011
• ARS
  ...from [[Alfa Romeo Giulietta]] and [[Alfa Romeo Sprint Speciale]], and the frame was turned by Bruno Patriarch considered the best designer in the capital ( ...he body of the ARS-U1, where ''U'' stands for a single copy, to be made of steel. In the sixties in Rome only Angelo and Enzo Filacchioni, expert panel beat
  2 KB (316 words) - 23:42, 11 October 2011
• Cinelli
  ...ts given to cycling, the modern handlebar, the first saddle with a plastic frame, the first foot clips, the first quick release pedals. ...ater, in 1978, Cino handed the company over to a young entrepreneur in the steel tube industry with the bicycle at heart: Antonio Colombo.
  3 KB (505 words) - 12:26, 16 December 2009
• Terra Modena
  Such an engine called for a frame with the same technology and beauty: it has a double perimeter bar with an system. It is made of aeronautical GAlsi 9 aluminum, not steel. This frame enables “trajectory precision even at
  6 KB (940 words) - 09:05, 12 November 2016
• Laforza
  ...ited States between 1988-89 with some modifications to the Magnum 4x4 base frame. The major differences included: reinforced and modified cross members, (tr For safety, Laforza offers an 18-gauge steel body, a rugged box-ladder frame, European touring sedan handling and a technologically advanced four-wheel
  5 KB (790 words) - 13:54, 10 December 2009
• Gilco
  [[Image:Ferrari125frame.jpg|thumb|right|300px|'''1947 Ferrari 125 Gilco sub frame''']] ...of Lurani were built also a number of [[Alfa]]s. The Gilco-Cattaneo pipe frame had been designed by the engineer Guido Cattaneo in cooperation with the sp
  12 KB (1,911 words) - 23:40, 29 September 2010
• Nassetti
  ...ssetti A.R is one of the finest products.A characteristic motor in its own frame. The motor-block " iL Pellegrino " was developed from e.g. the A.R model. T ...nished and the frame is unique. A tube-frame at the front and a steel back-frame fixed together, gives the motor a Spartan look which vever used to be the c
  7 KB (1,072 words) - 22:34, 18 April 2010
• Ducati SportClassic
  ...exhaust pipes on the right hand side in a 1425 mm wheelbase, trellis tube frame. Suspension is a fully-adjustable single Sachs rear shock on the left hand ...ins]] suspension front and rear, the fairing, steering damper, and a green frame to go with the silver and blue paint on the tank, lower clip-ons, fairing,
  7 KB (1,080 words) - 00:05, 10 November 2010
• Bandini 1100 Siluro
  ...l mudguards type motorcycle on wheels, leaving the body is adhering to the frame assuming forms without imposing its own. The result is a synergistic combin The frame is a refinement of the [[Bandini 1100|1100 sport]], produced in parallel, w
  5 KB (673 words) - 22:58, 1 June 2010
• Ducati 998
  | Frame || Tubular steel trellis frame
  4 KB (559 words) - 22:12, 9 November 2010
• Ferrari 348
  ...ent abilities built in to each suspension, as well as a removable rear sub-frame to speed up the removal of the engine for maintenance. *Chassis: Steel platform & sub-frame
  6 KB (876 words) - 07:45, 14 October 2009
• Bandini 1000 GT
  * Structure and [[material]]: frame of elliptical section tubes, special [[steel]] aeronautics derivation; patent No. 499843
  4 KB (501 words) - 22:28, 23 September 2009
• Casalini
  The Ydea has a very robust structure, consisting of a steel frame and a body glass resin layered by hand which provides a significant safety
  3 KB (389 words) - 22:28, 7 October 2010
• Itom
  1950 - produced the first ciclomotore with tubular frame and automatic clutch; this was soon followed with a two-speed version. ...had a 2 speed gearbox and a pressed steel monocoche (Italian: monoscocca) frame.
  6 KB (961 words) - 20:32, 22 November 2010
• Ducati 996
  | Frame || Tubular steel trellis frame ...able steering head also allowed geometry changes to the steel tube trellis frame making it suitable for different riding styles or race tracks.
  6 KB (932 words) - 22:04, 9 November 2010
• Ferrari 308GTB
  ...he 308GTB is mechanically identical to the GT4. Both sit on the same tube-frame [[automobile platform|platform]], with a 92 in wheelbase, and 4-wheel ...ss. This lasted through June, [[1977]], when the 308 was switched back to steel.
  5 KB (660 words) - 22:11, 30 April 2009
• Ducati Bronco
  |Frame || Tubular steel, duplex full cradle ...logy which began in 1952 with the [[Motorcycle_frame#Pressed_frame|pressed-frame]] [[Ducati 98]] models, which themselves had followed the [[Ducati Cucciolo
  6 KB (888 words) - 21:25, 9 November 2010
• Bandini formula 3
  [[Image:Telaio_bandini_formula_3.JPG|250px|thumb|The frame, weighs just 16 kilograms]] * Structure and [[material]]: frame of elliptical section tubes, special [[steel]] aeronautics derivation; patent No. 499843
  6 KB (916 words) - 11:24, 13 February 2009
• Ferrari 125
  The 125 S used a steel tube-frame chassis and had a [[double wishbone]] suspension with transverse [[leaf spr
  5 KB (751 words) - 23:47, 11 September 2009
• Ferrari 308
  ...he 308GTB is mechanically identical to the GT4. Both sit on the same tube-frame [[automobile platform|platform]], with a 92 in wheelbase, and 4-wheel ...ss. This lasted through June, [[1977]], when the 308 was switched back to steel.
  5 KB (739 words) - 23:29, 14 June 2009
• Ducati V-twin
  ...sent some prototype crankcases for Seely to work from. Ducati’s new Seely frame was ready in February 1971. ...ed, and the final ignition system used four coils, two on each side of the frame.
  22 KB (3,665 words) - 13:08, 18 April 2009
• Ollearo
  ...rd time with sophisticated engineering, was presented mounted on a bicycle frame and reinforced appropriately modified to accommodate a small engine connect ...le the two passengers were placed on a single seat behind the driver, the frame was in the shape of a turtle shell. The vehicle could reach a speed of 90 k
  6 KB (881 words) - 19:11, 25 June 2018
• Marciano
  ...r differential, an in house build the frame with small tubes of molybdenum steel, designed and implemented a low and sleek lightweight body. ...the passion for racing cars, he had improvised a builder, building a tube frame with iron, an Alfa Romeo 1.3 GT engine and a [[transmission]] from a [[Fiat
  5 KB (747 words) - 14:25, 21 April 2014
• Volugrafo
  ...iverd 2 hp at 3600 rpm. The exhaust gases actually ran into ad through the frame tubes. It used a chain driven transmission, the gearbox had two-speeds, use A supporting metal frame formed the chassis with an extremely narrow track of only 78 cm. A [[differ
  6 KB (919 words) - 20:31, 3 July 2019
• Ducati 999
  *'''Frame:''' Tubular steel trellis
  5 KB (636 words) - 10:48, 14 March 2009
• Ferrari 125 F1
  ...used a [[supercharged]] 1.5 L [[V12 engine]] and sported a steel tube-frame chassis with longitudinal and cross members. It had a [[double wishbone]]
  5 KB (617 words) - 22:06, 12 July 2009
• FOD
  ...4, the car used an innovative single-piece, cast aluminum alloy frame with steel reinforced aluminum chassis (resulting in a low weight of 420kg), a 565cc f
  3 KB (452 words) - 09:36, 18 November 2011
• Lambretta
  ...k the business to Milan where he built a larger factory producing seamless steel tubing and employing about 6,000. During the [[Second World War]] the facto ...sery. This basic design allowed a series of features to be deployed on the frame, which would later allow quick development of new models.
  15 KB (2,198 words) - 19:00, 30 January 2010
• Bandini 1100
  ...he proper relationship between lightness and torsional rigidity. The first frame was made completely into the [[Bandini Cars | Bandini]].
  5 KB (619 words) - 22:26, 23 September 2009

View (previous 100 | next 100) (20 | 50 | 100 | 250 | 500)