Search results

Page title matches

• Derailleur gears
  ...sprocket to another. Although widely referred to as "[[gear]]s", bicycle "gears" should properly be referred to as '''sprockets''' since they are driven by Some early designs used a system of rods to move the chain onto various gears.
  11 KB (1,674 words) - 23:29, 3 July 2009

Page text matches

• Gear train
  *Driving gears - attached to the input shaft *Driven gears - attached to the output shaft
  826 bytes (130 words) - 09:11, 7 October 2009
• Hub gear
  '''Hub gears''' or '''internal-gear hubs''' are a type of [[gear]] system used on [[bicy ...s of small wheeled bicycle, such as [[folding bicycle|folding bikes]]. Hub gears work by internal '''planetary''' or '''[[epicyclic gearing]]''', which mean
  4 KB (700 words) - 16:21, 13 June 2009
• Rack and pinion
  [[Category:Gears]]
  843 bytes (126 words) - 23:57, 11 September 2009
• Gear ratio
  [[image:gears_large.jpg|thumb|200px|Gears on a piece of farm equipment, gear ratio 1:1.61]] ...gear]] [[ratio]]''' is the relationship between the number of teeth on two gears that are meshed or two [[sprocket]]s connected with a common [[roller chain
  6 KB (1,061 words) - 07:42, 9 August 2009
• Shifter
  ...), mounted on either side of the steering column, where one increments the gears up, and the other down. The "shift pattern" refers to the layout of the gears. In a typical manual transmission car, first gear is located forwards, and
  6 KB (929 words) - 09:27, 14 June 2009
• Ducati 750 SS
  *Engine specification -- 4v V-twin, 5 gears
  618 bytes (90 words) - 23:24, 14 June 2009
• Ducati 620 SPORT
  *Engine specification -- 4v V-twin, 5 gears
  670 bytes (100 words) - 11:59, 19 November 2008
• Ducati 900 SS
  *Engine specification -- 4v V-twin, 6 gears
  616 bytes (90 words) - 08:38, 17 November 2008
• Twin-clutch gearbox
  ...umbered gears and reverse, while the inner clutch drives the even numbered gears. Shifts can be accomplished without interrupting power, by applying the eng
  4 KB (530 words) - 23:28, 3 July 2009
• Augusta
  ...the last year of the company, the 175 (with two gears) and 350 (with three gears) had the overhead camshaft distribution.
  2 KB (252 words) - 00:01, 7 February 2011
• Semi-automatic transmission
  ...ift stick]] only moves forward and backward to shift into higher and lower gears respectively, instead of the traditional H-pattern. The Bugatti Veyron use ..."Autostick", which was essentially a clutchless manual with three forward gears.
  4 KB (699 words) - 23:28, 3 July 2009
• Twin-clutch Gearbox
  ...ter clutch drives gears 1, 3, and 5 (and reverse). The inner clutch drives gears 2, 4, and 6. Shifts can be accomplished without interrupting power, by appl
  4 KB (587 words) - 08:08, 18 August 2009
• Quota 1100 ES
  |Transmission || Primary: helical gears; Secondary: shaft drive |Gear Box || 5 speed, constant mesh gears with built-in cush drive
  2 KB (275 words) - 22:58, 27 February 2009
• U engine
  944 bytes (139 words) - 16:03, 12 August 2009
• Prince
  ...top speed of 37.28 mph. The power was shaft driven, the gearbox had three gears and a reverse gear. The 1922 model was the improved type 20/22HP. The compa
  957 bytes (140 words) - 14:38, 12 August 2009
• Magliano
  ...ead. The three speeds changed is in the block which in turn controlled the gears. The tubed frame had a telescopic front fork and rear shock absorbers with
  1 KB (158 words) - 19:44, 15 June 2009
• Non-synchronous transmission
  ...mission''' is a form of [[Transmission (mechanics)|transmission]] based on gears that do not use [[synchronization|synchronizing mechanisms]]. They are foun ...ions. Their gear ratios and hydro-pneumatic systems are designed to change gears based on engine performance and other velocity indicators, delivering torqu
  9 KB (1,293 words) - 23:27, 3 July 2009
• Square engine
  1 KB (168 words) - 16:17, 13 June 2009

View (previous 20 | next 20) (20 | 50 | 100 | 250 | 500)